Roland BR-864 Bounce, Putting multiple tracks together, When using CHO/DLY When using REV

Recording/playing back a song

For more on the settings content, refer to “Loop Effect

Parameter Functions” (p. 131).

5.Press CURSOR [ ] [ ] to display the Send Level settings screen.

When using CHO/DLY

When using REV

6. Press CURSOR [ ] [ ] and the TIME/VALUE dial to

adjust each track’s send level.

*Pressing a REC TRACK button moves the cursor to the track corresponding to the button pressed.

Pressing [TRACK] switches to between Tr1–4 and Tr5–8.

The “send level” is the volume level of the signal sent from each respective track to each effect, and you can change the amount of effect applied by adjusting the send level.

The send level for each track is also indicated in the lower row of the display.

Send level of the each tracks

7.After you have completed adjusting the send level, press [EXIT] repeatedly to return to the Play screen

You can switch screens in the following sequence, with the screen cycling to the next screen each time [LOOP EFFECTS] is pressed.

Loop Effects selection screen → Send Level screen → Type screen → Play screen

(10) Bounce

(Putting multiple tracks together)

1

2

3

2

6 5 4

1.Press [REC MODE] repeatedly until “BOUNCE” is indicated for REC MODE at the left of the screen.

■: V-Tracks with recorded data.

❐: V-Tracks without data.

“What are V-Tracks?” (p. 14)

2.Use CURSOR [ ] [ ] and the TIME/VALUE dial to select the track/V-track to which you want to record.

3.Press [ENTER].

Return to the Play screen.

4.Press [REC].

[REC] flashes in red and the BR-864 enters the recording standby state.

Flash

42