Parameter | Description |
|
|
Connect Information | It is the setting for WPA mode. |
Protocol | This adapter supports three kinds of protocol for authentication |
| including TLS, TTLS and PEAP. These three protocols require a |
| certificate which is provided by the Certificate Server. PEAP and |
| TTLS require a set of user name and password in addition. To get |
| the certificate and the personal user name and password, please |
| contact with your administrator. |
| TLS – Select a certificate from the “Certificate“ list. |
| PEAP – Input the “User Name“ and “Password“ and also select a |
| certificate from the “Certificate“ list. |
| TTLS – Input the “User Name“, “Password“ and “Phase2Auth“ and |
| also select a certificate from the “Certificate“ list. |
User Name | It is the setting for PEAP protocol. |
Password | It is the setting for PEAP protocol. |
Phase2Auth | It is the setting for TTLS protocol, including PAP, CHAP, |
| MSCHAP and MSCHAPv2 |
It is the setting for | |
| format to be the password for the authentication within the |
| network. |
Certificate | All the available certificates for TLS or PEAP will display in the |
| list. Please select a proper certificate for the wireless |
| authentication. |
|
|
Parameter | Description |
|
|
WEP Key | If the AP uses WEP data encryption function, please clcik “WEP |
| KEY SETTING“ to setup the WEP key. |
WEP KEY SETTING | Setup the four sets of WEP key by clicking the button. |
Change/Apply | Clcik “Change“ will enable you to setup the WPA setting. In the |
| meantime, the button will change to “Apply“ for you to confirm |
| your settings. |
|
|
26
