Manuals / LevelOne / Computer Equipment / Computer Hardware

LevelOne WNC-0304USB, 11g USB Adapter w/LCD WiFi Detector user manual Specifications

Models: 11g USB Adapter w/LCD WiFi Detector WNC-0304USB

1 44

Download 44 pages 19.58 Kb

Page 4

Image 4

•Suitable for Any Notebook or Desktop PC.

1.2Specifications

•Standard: IEEE 802.11g/b

•LCD Size: 96x32 with EL backlight

•Battery: 4.2V Rechargeable Li-Polymer Battery

•Bus Type: USB 2.0 Type A

•Frequency Band: 2.4000~2.4835GHz (Industrial Scientific Medical Band)

•Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM (11g)

BPSK, QPSK, CCK (11b)

•Data Rate: 54/48/36/24/18/12/11/9/6/5.5/2/1Mbps auto fallback

•Security: 64/128/256-bit WEP Data Encryption, WPA (TKIP with IEEE 802.1x) and WPA2 (AES with IEEE 802.1x)

*WPA2 supports Windows 2000/XP only

•Antenna: Internal Antenna

•Drivers: Windows 98SE/ME/2000/XP/

•Transmit Power: 16dBm (Typical)

•Dimension: 14(H) x 28.5(W) x 91(D)

•Temperature: 32~140°F (0 ~60°C)

•Humidity: 0-85% (NonCondensing)

•Certification: FCC, CE

Page 4

Image 4

LevelOne WNC-0304USB, 11g USB Adapter w/LCD WiFi Detector user manual Specifications

Contents

WNC-0304USB User Manual11g USB Adapter w/LCD WiFi Detector LevelOneCONTENTS HOW TO CHARGE THE BATTERY OF WI-FI DETECTORHOW TO USE THE WI-FI DETECTOR HOW TO INSTALL THE DRIVER AND UTILITY1.1 Features 1 Introduction1.2 Specifications Quick Installation Guide 1.3 Package ContentsWNC-0304USB USB Cable CD Manual/Driver/Utility 2 How to charge the battery of Wi-Fi Detector 3 How to use the Wi-Fi Detector The Icons on the LCD display are displayed as follows Seek/Lock 4 How to install the driver and utility 4.1 Install the Configuration UtilityPlease click “Next” to continue the installation Click “Finish” to complete the installation 4.2 Install the USB adapter Click “Finish” to complete the installation 4.3 Using the Configuration Utility First WayC. Uncheck “Use Windows to configure my wireless network settings” Second WayA. Double-click the icon B. Click “Advance” 5 How to configure the utility 5.1 Wireless Connection Status connecting to. The information includes Channel, Type, SSID, TX Rate and Encrypt settings. Note Please refer to Section 5.2 forMore Setting For setting more functions including disable/enable WEP and5.2 General Connection Setting When the adapter works in 11b mode, the maximum data rate is If “Any“ check box is enabled, the adapter will survey and connectto one of the available wireless stations without checking the consistency of channel and SSID with the wireless stationAuthentication Mode This setting has to be consistent with the wireless networks thatOpen System - No authentication is needed among the wireless Shared Key - Only wireless stations using a shared key WEP5.3.1 WEP Setting 5.3 WEP and WPA EncryptionDefault Key ID The keys are used to encrypt data transmitted in the wireless“01234567890123456789abcdef“ or “administrator“ Clcik “Change“ will enable you to setup the WEP key. In thePage 5.3.2 WPA/WPA2 Setting Page It is the setting for WPA mode This adapter supports three kinds of protocol for authenticationTTLS require a set of user name and password in addition. To get the certificate and the personal user name and password, please5.4 Advanced Settings Continuous Access Mode CAM - The adapter will always setsaving mode when it is idle, but some components of the adapter is still alive. In this mode, the power consumption is larger than“Maximum Power-Saving“ mode PSP XLink Mode5.5 Software AP Mode 5.5.2 AP Connection Status5.5.2 AP General Connection Setting If “Hide SSID“ check box is enabled, the AP will not appear in the site survey list of any wireless adapters. It means Only thewireless adapters set the same SSID can connect to the AP. It Clcik “Change“ will enable you to setup the parameters ofWireless adapters connect to the AP can access to the wired adapter in the list be the bridge between the wireless and wiredshould use the shorter preamble type MAC Address Filter5.5.3 MAC Address Filter Right Click “Wireless Network Connection” and select “Properties” 6 X-Link Installation1 Open Control Panel --Æ Internet Connection Page Then select “Advanced” 6 Setting completed, please turn your PSP into online status 8 Start the X-Link software after the installationClicks “OK” to start online gaming 7 Troubleshooting 1. What is the IEEE 802.11g standard?2. What is the IEEE 802.11b standard？ 3. What does IEEE 802.11 feature support？5. What is Infrastructure？ 6. What is BSS ID？7. What is WEP？ 8. What is TKIP?12. What is DSSS？What is FHSS？And what are their differences？ 13. What is Spread Spectrum？14. What is the maximum AP that can be detected? 15. What is the maximum detection distance?