2 How to charge the battery of Wi-Fi Detector
1.Remove the cap from the Wi-Fi Detector, slide the power switch to the “ON” position and carefully insert the USB connector into any available USB port on your computer. You will see the recharging screen.
The battery strength indicator will be animated while the Wi-Fi detector is being recharged.
The “Link/Act” icon will blink when the Wi-Fi detector is being used as a wireless USB adapter to surf the internet.
2.When the Wi-Fi detector is finished recharging it will automatically stop charging the battery. When it is finished recharging the battery you will see “Charge Finish” displayed on the LCD and the battery strength indicator will stop blinking.
3.If you slide the power switch to the “OFF” position when in recharging, the Wi-Fi detector will stop recharging the battery and you will see “Stop charging” displayed on the LCD and the battery strength indicator will stop blinking.
zPlease note that, this adapter cannot be charged through hub devices, charging through PC only. Charging through hub devices might result damage to the battery.
4
