Parameter | Description |
|
|
Authentication Mode | This setting has to be consistent with the wireless networks that |
| the adapter intends to connect. |
| Open System – No authentication is needed among the wireless |
| network. |
| Shared Key – Only wireless stations using a shared key (WEP |
| Key identified) are allowed to connect each other. |
| Auto – Auto switch the authentication algorithm depending on the |
| wireless networks that the adapter is connecting to. |
WEP Encryption Key Setting | Click this button to setup the WEP key. Please refer to Section |
| 5.3 for the details. |
WPA Encryption Setting | Click this button to setup the WPA function. Please refer to |
| Section 5.3 for the details. |
Profile |
|
Profile Name | You can save the network setting as a profile. To connect to the |
| network without making additional configuration, you can load the |
| profile. |
Load | Load the setting values from the file in the “Profile Name“ list. The |
| new settings will be activated immediately. |
Save Current | Input a file name and click “Save Current“ to write the current |
| setting values to be a profile in the “Profile Name“ list. |
Delete | Delete the profile you select. |
Other |
|
Advanced Setting... | For more advanced setting, please click it. To know more of the |
| setting, please refer to Section 5.4. |
Information | Click this button to view the version of the driver, firmware and |
| the MAC Address of the adapter. |
|
|
20
