Manuals / LevelOne / Computer Equipment / Computer Hardware

LevelOne 11g USB Adapter w/LCD WiFi Detector Using the Configuration Utility, First Way

Models: 11g USB Adapter w/LCD WiFi Detector WNC-0304USB

1 44

Download 44 pages 19.58 Kb

Page 15

Image 15

4.3 Using the Configuration Utility

To setup the USB adapter, double-click the icon in the system tray.

For Windows XP, there is a “Windows Zero Configuration Tool” by default for you to setup wireless clients. If you want to use the Utility of the USB adapter, please follow one of the ways as below.

First Way

A.Double-click the utility icon in the system tray.

B.Click “Yes” to use the utility of the USB adapter.

Page 15

Image 15

LevelOne 11g USB Adapter w/LCD WiFi Detector, WNC-0304USB user manual Using the Configuration Utility, First Way

Contents

LevelOne WNC-0304USBUser Manual 11g USB Adapter w/LCD WiFi DetectorHOW TO INSTALL THE DRIVER AND UTILITY CONTENTSHOW TO CHARGE THE BATTERY OF WI-FI DETECTOR HOW TO USE THE WI-FI DETECTOR1 Introduction 1.1 Features1.2 Specifications 1.3 Package Contents Quick Installation GuideWNC-0304USB USB Cable CD Manual/Driver/Utility 2 How to charge the battery of Wi-Fi Detector 3 How to use the Wi-Fi Detector The Icons on the LCD display are displayed as follows Seek/Lock 4.1 Install the Configuration Utility 4 How to install the driver and utilityPlease click “Next” to continue the installation Click “Finish” to complete the installation 4.2 Install the USB adapter Click “Finish” to complete the installation First Way 4.3 Using the Configuration UtilitySecond Way C. Uncheck “Use Windows to configure my wireless network settings”A. Double-click the icon B. Click “Advance” 5 How to configure the utility 5.1 Wireless Connection Status For setting more functions including disable/enable WEP and connecting to. The information includes Channel, Type, SSID, TXRate and Encrypt settings. Note Please refer to Section 5.2 for More Setting5.2 General Connection Setting consistency of channel and SSID with the wireless station When the adapter works in 11b mode, the maximum data rate isIf “Any“ check box is enabled, the adapter will survey and connect to one of the available wireless stations without checking theShared Key - Only wireless stations using a shared key WEP Authentication ModeThis setting has to be consistent with the wireless networks that Open System - No authentication is needed among the wireless5.3 WEP and WPA Encryption 5.3.1 WEP SettingClcik “Change“ will enable you to setup the WEP key. In the Default Key IDThe keys are used to encrypt data transmitted in the wireless “01234567890123456789abcdef“ or “administrator“Page 5.3.2 WPA/WPA2 Setting Page the certificate and the personal user name and password, please It is the setting for WPA modeThis adapter supports three kinds of protocol for authentication TTLS require a set of user name and password in addition. To getContinuous Access Mode CAM - The adapter will always set 5.4 Advanced SettingsPSP XLink Mode saving mode when it is idle, but some components of the adapteris still alive. In this mode, the power consumption is larger than “Maximum Power-Saving“ mode5.5.2 AP Connection Status 5.5 Software AP Mode5.5.2 AP General Connection Setting Clcik “Change“ will enable you to setup the parameters of If “Hide SSID“ check box is enabled, the AP will not appear in thesite survey list of any wireless adapters. It means Only the wireless adapters set the same SSID can connect to the AP. ItMAC Address Filter Wireless adapters connect to the AP can access to the wiredadapter in the list be the bridge between the wireless and wired should use the shorter preamble type5.5.3 MAC Address Filter 6 X-Link Installation Right Click “Wireless Network Connection” and select “Properties”1 Open Control Panel --Æ Internet Connection Page Then select “Advanced” 8 Start the X-Link software after the installation 6 Setting completed, please turn your PSP into online statusClicks “OK” to start online gaming 3. What does IEEE 802.11 feature support？ 7 Troubleshooting1. What is the IEEE 802.11g standard? 2. What is the IEEE 802.11b standard？8. What is TKIP? 5. What is Infrastructure？6. What is BSS ID？ 7. What is WEP？15. What is the maximum detection distance? 12. What is DSSS？What is FHSS？And what are their differences？13. What is Spread Spectrum？ 14. What is the maximum AP that can be detected?