Manuals / LevelOne / Computer Equipment / Computer Hardware

LevelOne WNC-0304USB, 11g USB Adapter w/LCD WiFi Detector user manual Then select “Advanced”

Models: 11g USB Adapter w/LCD WiFi Detector WNC-0304USB

1 44

Download 44 pages 19.58 Kb

Page 38

Then select “Advanced”

3)Select “Use the following IP address:” and enter “192.168.0.1” for IP address: “255.255.255.0” for Subnet mask then clicks “OK”

4) Under Wireless Internet Network Enable “Use Windows to configure my wireless network setting”

Then select “Advanced”

36

Image 38

LevelOne WNC-0304USB, 11g USB Adapter w/LCD WiFi Detector user manual Then select “Advanced”

Contents

11g USB Adapter w/LCD WiFi Detector WNC-0304USBUser Manual LevelOneHOW TO USE THE WI-FI DETECTOR CONTENTSHOW TO CHARGE THE BATTERY OF WI-FI DETECTOR HOW TO INSTALL THE DRIVER AND UTILITY1.1 Features 1 Introduction1.2 Specifications WNC-0304USB USB Cable CD Manual/Driver/Utility 1.3 Package ContentsQuick Installation Guide 2 How to charge the battery of Wi-Fi Detector 3 How to use the Wi-Fi Detector The Icons on the LCD display are displayed as follows Seek/Lock 4 How to install the driver and utility 4.1 Install the Configuration UtilityPlease click “Next” to continue the installation Click “Finish” to complete the installation 4.2 Install the USB adapter Click “Finish” to complete the installation 4.3 Using the Configuration Utility First WayA. Double-click the icon B. Click “Advance” Second WayC. Uncheck “Use Windows to configure my wireless network settings” 5 How to configure the utility 5.1 Wireless Connection Status More Setting connecting to. The information includes Channel, Type, SSID, TXRate and Encrypt settings. Note Please refer to Section 5.2 for For setting more functions including disable/enable WEP and5.2 General Connection Setting to one of the available wireless stations without checking the When the adapter works in 11b mode, the maximum data rate isIf “Any“ check box is enabled, the adapter will survey and connect consistency of channel and SSID with the wireless stationOpen System - No authentication is needed among the wireless Authentication ModeThis setting has to be consistent with the wireless networks that Shared Key - Only wireless stations using a shared key WEP5.3.1 WEP Setting 5.3 WEP and WPA Encryption“01234567890123456789abcdef“ or “administrator“ Default Key IDThe keys are used to encrypt data transmitted in the wireless Clcik “Change“ will enable you to setup the WEP key. In thePage 5.3.2 WPA/WPA2 Setting Page TTLS require a set of user name and password in addition. To get It is the setting for WPA modeThis adapter supports three kinds of protocol for authentication the certificate and the personal user name and password, please5.4 Advanced Settings Continuous Access Mode CAM - The adapter will always set“Maximum Power-Saving“ mode saving mode when it is idle, but some components of the adapteris still alive. In this mode, the power consumption is larger than PSP XLink Mode5.5 Software AP Mode 5.5.2 AP Connection Status5.5.2 AP General Connection Setting wireless adapters set the same SSID can connect to the AP. It If “Hide SSID“ check box is enabled, the AP will not appear in thesite survey list of any wireless adapters. It means Only the Clcik “Change“ will enable you to setup the parameters ofshould use the shorter preamble type Wireless adapters connect to the AP can access to the wiredadapter in the list be the bridge between the wireless and wired MAC Address Filter5.5.3 MAC Address Filter 1 Open Control Panel --Æ Internet Connection 6 X-Link InstallationRight Click “Wireless Network Connection” and select “Properties” Page Then select “Advanced” 6 Setting completed, please turn your PSP into online status 8 Start the X-Link software after the installationClicks “OK” to start online gaming 2. What is the IEEE 802.11b standard？ 7 Troubleshooting1. What is the IEEE 802.11g standard? 3. What does IEEE 802.11 feature support？7. What is WEP？ 5. What is Infrastructure？6. What is BSS ID？ 8. What is TKIP?14. What is the maximum AP that can be detected? 12. What is DSSS？What is FHSS？And what are their differences？13. What is Spread Spectrum？ 15. What is the maximum detection distance?