RTC battery
Description | Spare part number |
|
|
RTC battery |
|
|
|
Before removing the RTC battery, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 42).
5.Remove the following components:
a.Bottom door (see Bottom door on page 44).
b.Hard drive (see Hard drive on page 48)
c.Optical drive (see Optical drive on page 46)
d.Keyboard (see Keyboard on page 56)
e.Heat shield (see Heat shield on page 59)
f.Fan (see Fan on page 61)
g.Heat sink (see Heat sink on page 63)
h.Top cover (see Top cover on page 67)
i.System board (see System board on page 85)
Remove the RTC battery:
1.Position the system board
2.Disconnect the battery cable from the system board (1).
88 Chapter 4 Removal and replacement procedures
