Netopia R7200 manual Served IP Addresses

Page 140

13-10 User’s Reference Guide

State: Displays the state of the speciﬁed route, based on the frequency of Routing Table Maintenance Protocol (RTMP) packets received for the route. The state can be Good, Suspect, or Bad. AppleTalk routers regularly exchange RTMP packets to update AppleTalk routing information.

Next Rtr Addr.: Displays the DDP or IP address of the next hop for the speciﬁed route. A DDP address is displayed if the router shown is on the local AppleTalk network. DDP address means that a connection to the next-hop router is by a native AppleTalk network (e.g., LocalTalk or EtherTalk Phase II). An IP address is displayed if the Netopia R7200 is connected to the router shown using AURP. IP address means a connection transports over AURP (AppleTalk encapsulated IP).

Pkts Fwded: The number of packets sent to the router shown.

Each row in the AppleTalk routing table corresponds to an AppleTalk route or network range. If the list of routes shown exceeds the size of the screen, you can scroll through it by using SCROLL UP and SCROLL DOWN.

To scroll up, select SCROLL UP at the top of the table and press Return. To scroll down, select SCROLL DOWN at the bottom of the table and press Return.

Served IP Addresses

You can view all of the IP addresses currently being served by the Netopia R7200 SDSL Router from the Served IP Addresses screen.

From the Statistics & Logs menu, select Served IP Addresses. The Served IP Addresses screen appears.

		Served	IP Addresses
-IP Address-------	Type----	Expires--	Client Identifier--------------------------
----------------------------------		SCROLL UP-----------------------------------
192.168.1.100	DHCP	00:36	EN:	00-00-c5-4a-1f-ea
192.168.1.101	DHCP	00:58	EN:	08-00-07-16-0c-85

192.168.1.102

192.168.1.103

192.168.1.104

192.168.1.105

192.168.1.106

192.168.1.107

192.168.1.108

192.168.1.109

192.168.1.110

192.168.1.111

192.168.1.112

192.168.1.113

---------------------------------SCROLL DOWN----------------------------------

Lease Management...

EN = Ethernet Address; AT = AppleTalk Address; CP = Profile Name; HX = hex

To manage DHCP leases, select Lease Management in this screen.

Image 140

Contents Netopia R7200 Sdsl Router Part Number Contents Part II Advanced Configuration Contents Aurp Snmp Xmodem Part III Appendixes User’s Reference Guide Part I Getting Started User’s Reference Guide Overview Features and capabilitiesChapter Introduction How to use this guide Chapter Setting Up Internet Services Finding an Internet service providerSetting up a Netopia R7200 account Obtaining an IP address Unique requirementsPricing and support Endorsements Deciding on an ISP accountObtaining information from the ISP Local LAN IP address information to obtainWith Network Address Translation Without Network Address TranslationUser’s Reference Guide Chapter Making the Physical Connections Find a locationIdentify the connectors and attach the cables What you needNetopia R7200 Sdsl Router back panel ports Your router onNetopia R7200 Sdsl Router status lights Netopia R7200 LED front panelChapter Connecting to Your Local Area Network Readying computers on your local networkUser’s Reference Guide Connecting to an Ethernet network 10Base-T Adding an external modem Connecting to a LocalTalk network Chapter Setting up your Router with the SmartStart Wizard Before running SmartStart Setting up your Router with the SmartStart Wizard SmartStart Wizard conﬁguration screensAdvanced setup Easy optionAdvanced option Conﬁguration screen on Dynamic conﬁguration recommended Conﬁguration tabStatic conﬁguration optional Add. Repeat this process for the secondary DNS Conﬁguring TCP/IP on Macintosh computers TCP/IPTCP/IP or MacTCP Dynamic conﬁguration using MacIP optional Setting up your Router with the SmartStart Wizard User’s Reference Guide Chapter Console-Based Management Connecting through a Telnet session Connecting a console cable to your router Conﬁguring Telnet softwareNavigating through the console screens PC ANSI-BBSAccessing the Easy Setup console screens Chapter Easy SetupEasy Setup console screens See Appendix A, Troubleshooting, for more suggestions Quick Easy Setup connection path Sdsl Line Conﬁguration Main Menu appearsEasy Setup Proﬁle Previous Screen Next ScreenIP Easy Setup Easy Setup Security Conﬁguration Previous Screen To Main Menu Part II Advanced Configuration User’s Reference Guide Chapter WAN and System Configuration WAN conﬁgurationATM VPI ATM VCI Creating a new Connection Proﬁle IPX Profile Parameters Remote IPX Network Datalink PPP/MP Options Data Compression Default proﬁle Main Menu Default Proﬁle screen appears IP parameters default proﬁle screen IPX parameters default proﬁle screen System conﬁguration screensNavigating through the system conﬁguration screens System conﬁguration features Network protocols setup Filter sets ﬁrewallsIP address serving Date and timeConsole conﬁguration Upgrade feature set Snmp Simple Network Management ProtocolSecurity LoggingInstalling the Syslog client User’s Reference Guide Chapter Line Backup Backup Conﬁguration screen appears Backup Conﬁguration screen AtdtIP Setup screen Using Scheduled Connections with Backup Connection ProﬁlesScheduled Connections screen appears Management/Statistics Force Recovery Snmp Support QuickViewEvent Logs User’s Reference Guide Chapter IP Setup and Network Address Translation Network Address Translation featuresHOW NAT Works Using Network Address Translation Previous ScreenV2 multicast Numbered Associating port numbers with nodes Sdsl WAN1Advanced IP/IPX router conﬁguration options Data Link Options IP Setup and Network Address Translation Network Address Translation guidelines IP setup User’s Reference Guide Select Add Export. The Add Exported Service screen appears Select Service. a pop-up menu of services and ports appears IP subnets User’s Reference Guide Static routes Static Routes screen will appear Viewing static routesAdding a static route Deleting a static route Rules of static route installationModifying a static route Main Menu System Configuration IP Address Serving 176.163.222.10 Dhcp NetBios Options Serve Bootp Clients IP Address Pools IP Setup and Network Address Translation Dhcp NetBIOS Options NetBios Type MacIP KIP forwarding setup You have ﬁnished your IP setup User’s Reference Guide Chapter IPX Setup IPX featuresIPX deﬁnitions Internetwork Packet Exchange IPXService Advertising Protocol SAP IPX addressSocket Routing Information Protocol RIPIPX spooﬁng NetBIOSIPX setup screen Default Gateway Address IPX routing tables User’s Reference Guide AppleTalk protocol Chapter AppleTalk SetupAppleTalk networks AT Routing Table MacIP Routers and seedingInstalling AppleTalk Upgrade Feature Set EtherTalk setup Conﬁguring AppleTalkLocalTalk setup Aurp Free Trade Zone Aurp setupViewing Aurp partners Adding an Aurp partner Modifying an Aurp partnerConﬁguring Aurp Options Deleting an Aurp partnerReceiving Aurp connections Aurp Options Tickle Interval Hhmmss User’s Reference Guide Chapter Monitoring Tools Quick View status overviewGeneral status Current status Status lightsStatistics & Logs General StatisticsNetwork Interface Event historiesPhysical Interface WAN Event History Routing tables Device Event HistoryIP routing table AppleTalk routing table IPX routing tableIPX Sap Bindery table Served IP Addresses IP Address Lease Management screen appears System Information SnmpSnmp Setup screen Community stringsSnmp traps Setting the IP trap receivers Viewing IP trap receiversModifying IP trap receivers Deleting IP trap receiversWeb-based management pages Event History pages WAN Event History Device Event History User’s Reference Guide User accounts Chapter SecuritySuggested security measures Protecting the Security Options screen Protecting the conﬁguration screensDial-in console access Enable SmartStart/SmartView/Web server Telnet accessAbout ﬁlters and ﬁlter sets What’s a ﬁlter and what’s a ﬁlter set?How ﬁlter sets work Filter priorityHow individual ﬁlters work Port numbers ﬁltering ruleParts of a ﬁlter Port number comparisons Other ﬁlter attributesPutting the parts together UDPFiltering example #1 Filtering example #2Design guidelines Disadvantages of ﬁltersAn approach to using ﬁlters Working with IP ﬁlters and ﬁlter setsAdding a ﬁlter set Naming a new ﬁlter setInput and output ﬁlters-source and destination Adding ﬁlters to a ﬁlter setADD this Filter NOW Cancel Viewing ﬁlter sets Viewing ﬁltersModifying ﬁlters Deleting ﬁltersSample IP ﬁlter set Modifying ﬁlter setsDeleting a ﬁlter set TCP Icmp UDP Possible modiﬁcations User’s Reference Guide IPX ﬁlters Adding a packet ﬁlter IPX packet ﬁltersViewing and modifying packet ﬁlters IPX packet ﬁlter sets Deleting a packet ﬁlterViewing and modifying packet ﬁlter sets Adding a packet ﬁlter setNo Match Viewing and modifying SAP ﬁlters IPX SAP ﬁltersDeleting a packet ﬁlter set Adding a SAP ﬁlter Deleting a SAP ﬁlterAdding a SAP ﬁlter set IPX SAP ﬁlter setsViewing and modifying SAP ﬁlter sets Deleting a SAP ﬁlter set Basic protocol types Firewall tutorial General ﬁrewall termsBasic IP packet components Firewall Logic Firewall design rulesExample TCP/UDP Ports Binary representation Logical and functionExample IP ﬁlter set screen Implied rulesEstablished connections Filter basics Example networkExample ﬁlters ExampleExample Example Chapter Utilities and Diagnostics Ping Receive return Ping packet Trace Route Stop PingTelnet client Factory defaults Disconnect Telnet console sessionTransferring conﬁguration and ﬁrmware ﬁles with Tftp Updating ﬁrmwareDownloading conﬁguration ﬁles Uploading conﬁguration ﬁles Transferring conﬁguration and ﬁrmware ﬁles with XmodemIdle Do you want to send a saved configuration to your Netopia? Restarting the system Part III Appendixes User’s Reference Guide Appendix a Troubleshooting Conﬁguration problemsConsole connection problems Network problemsHow to reset the router to factory defaults Power outagesHow to reach us Technical supportBefore contacting Netopia Environment proﬁleOnline product information FAX-BackUser’s Reference Guide About IP addressing What is IP?Appendix B Understanding IP Addressing Subnets and subnet masks Example Using subnets on a Class C IP internet Subnet masksNetwork conﬁguration ISP NetworkBackground Example Working with a Class C subnetDistributing IP addresses Technical note on subnet masking Dhcp address serving Netopia R7200 Dhcp server characteristicsConﬁguration Using address serving Manually distributing IP addressesMacIP serving Serve dynamic WAN clientsTips and rules for distributing IP addresses Understanding IP Addressing B-9Dhcp example Nested IP subnets Internet0.0 C.1 WAN 3719 Broadcasts Packet header typesUser’s Reference Guide Background Appendix C Understanding Netopia NAT BehaviorNetwork conﬁguration User’s Reference Guide Understanding Netopia NAT Behavior C-3 Netopia Router WWW Server ISP Router LAN Exported services Understanding Netopia NAT Behavior C-5Important notes Understanding Netopia NAT Behavior C-7 Summary Appendix D Binary Conversion Table Decimal Binary Appendix E Further Reading User’s Reference Guide Further Reading E-3 User’s Reference Guide Appendix F Technical Specifications and Safety Information Pinouts for Auxiliary port modem cableEnvironment Power requirementsDescription Software and protocols Agency approvals Regulatory noticesNorth America InternationalImportant safety instructions Declaration for Canadian usersTelecommunication installation cautions BatteryAppendix G About Sdsl User’s Reference Guide Glossary User’s Reference Guide Glossary User’s Reference Guide Remapping See network number remapping User’s Reference Guide Glossary User’s Reference Guide Index NumericsIndex-2 Index-3 Index-4 Index-5 Index-6 Limited Warranty and Limitation of Remedies User’s Reference Guide