Yorkville Sound CA1T owner manual Main in Terminal Strip, AUX 1 and AUX 2 Inputs

DC	24V 15A
+	-	COM	4Ω	25V	70V	100V

0

25V 0

25V 0

25V

Connecting the speakers to 25V output

DC	24V 15A
+	-	COM	4Ω	25V	70V	100V

0

70V 0

70V 0

70V

Connecting the speakers to 70V output

DC	24V 15A
+	-	COM	4Ω	25V	70V	100V

0

100V 0

100V 0

100V

Connecting the speakers to 100V output

to the amplifier’s inputs) and can be used to feed an external power amplifier, a signal processor (e.g. an equalizer) or any other external appliance. The unbalanced signal is affected by the individual input controls. Before using the PRE OUT you need to remove the bridging-strip between this binding post and the MAIN IN terminal (21).

21. MAIN IN Terminal Strip

After removing the bridging-strip between the PRE OUT and the MAIN IN termi- nals you can use an external signal processor (e.g. an equalizer) in the audio- chain between the pre-amplifier and the power output stage of the power ampli- fier This opportunity provides a proper solution whenever shaping or improving the audio signal is necessary (adjusting delay times, equalizing, eliminating the Larsen-effect, etc.). The input is unbalanced, and is affected by the tone controls and the master volume control.

22. AUX 1 and AUX 2 Inputs

These two RCA-type connectors let you connect the two channels of an external high-level unbalanced signal source, such as an AM/FM tuner, a cassette deck, a CD player etc. Use input sensitivity switch (27), suitable for difference appliances.

23. INPUT 2, INPUT 3 and INPUT 4 lnputs

These three balanced/unbalanced combination type jack (XLR and 6.3mm) inputs

Unbalanced Signal

(channel Lo R)

Earth

8