IP POWER 9212 USER MANUAL
3. You an control multi power by use the power extension cord
NOTICE: Do not connect too much energy intensive electrical equipment such as air conditioner, electrical heater, microwave over or over in the same electrical outlet. Too much electrical currency may cause fire. This product not guaranties the possible damage because of too much electrical currency.
Software installation
Having connected the power supply and network cable with RJ45 port to the 9200, please install the software as the follow steps:
1.Start your computer, put the install disc in the CDROM, and then find the file named ipeditv3.exe in the install disc.
2.Copy the file to desktop or any directory you want save to.
3.Start the initial setting process following the construction in next section.
NOTICE: IP Power 9212 needs not any driver of application software; its entire operation interface is built in its hardware. Ipeditv3.exe can find the virtual IP address for you.
5. Initial Settings
Initial settings through the Ethernet
1.Double click the IPEditV3.exe :
- 11 - | VER. X.X, |