IP POWER 9212 USER MANUAL
Setting the password for IP Power 9212
Click the change password option at the left window and you can enter the change password page. Follow the instructions, fill in the old password and new password, then click the apply button to confirm.
Setting the IP address for IP Power 9212
1. Setting a fixed IP address for IP Power 9212.
Click the setup option in the left side of the window and you can enter the setting web page. Then follow the instructions fill in the new IP address, mask, and gateway for IP Power 9212, forbidden the DHCP service, click the submit button to confirm.
Notice：
1)The format of IP Address : xxx.xxx.xxx.xxx: yyyyy，the port range of yyyyy is 1~32767。
2)The range of Subnet Mask is xxx.xxx.xxx.0 ~ xxx.xxx.xxx.254。
3)If disable DHCP , you can set TCP Port and Default Gateway；the default port of DHCP Enable is xxx.xxx.xxx.xxx:80，and the Default Gateway is supply by server 。
4)If use the port other than 80 , you need to key full address http://xxx.xxx.xxx.xxx:yyyyy in IE/ Netscape ，or use the attached program IPEditV3.exe to login.。
- 17 - | VER. X.X, |