New Media Technology 9212 manual Ver

IP POWER 9212 USER MANUAL

B. Light : This device can control 9202 / 9212 (IP Power) - by change the default setting of : Normal close or normal open

C. Motor : This device can control 9203(IP Motor) –control the direction of turning..

3. Controlled IP Address: Setting the Ip Address of controlled device .

In Inter - control mode when transfer , . the Out Light(P6.1/P6.2) will always on ，if the main controller freeze the Out Light P6.1 is always on，if the controlled device freeze , the light of P6.2 is always on.。

2-1 For example : Control Ip Motor by DI board of IP Power 9212

Step 1 : Go to SETUP , change Connect Client and set as Motor ,

Step 2 : key in the IP address of controlled device (IP Motor)

Step 3 : Click Submit to confirm setting , when the count windows is off , the new login windows jump out as following pictures.

SMTP for E-Mail : receive IP address & inform as Sensor trigger

IP Power can setup the e-mail address for receive change from sensor part . As setting up the receiver e-mail address, IP Power will send its IP Address to receiver .

- 19 - VER. X.X,