Multiquip b46s90 manual Stopping The Engine, Place the safety stop switch in the OFF position

operation

Stopping The Engine

1.Move the throttle lever to the (Figure 32) "IDLE" position and run the engine for three minutes at low speed.

IDLE

THROTTLE

LEVER

Figure 32. Throttle Lever (Idle)

2.After the engine cools, turn the engine start/stop switch to the “OFF” position (Figure 33).

Figure 33. Engine ON/OFF Switch

(OFF Position)

3.Place the safety stop switch (Figure 34) in the "OFF" position.

OFF

4.Close the fuel shut- off valve (Figure 35) by moving the fuel valve lever to the OFF position.

OFF

Figure 35. Fuel Valve Lever (OFF)

Figure 34. Safety Stop Switch (OFF)

page 26 — b46S90 WALK-BEHIND TROWEL • operation and parts manUAL — rev. #0 (06/13/13)