Mitel 3300 Configure for Line Side/Trunk Side Termination, DSU R2 Card R2 Installation Overview

Page 233

Install Upgrades and FRUs

5.Slide the FIM into the bottom slot 1 or slot 6 until it connects with the backplane firmly. Fasten the FIM in place with the two screws provided or use the latch on the card guides. See FIM and PRC Installation in the DSU Node.

6.Remove the anti-static strap from your wrist.

DSU R2 Card

R2 Installation Overview

The following section describes how to install the R2 card and R2 interface assembly. You will need to program the R2 card into the 3300 ICP database to allocate links and trunks.

Install the R2 card in the following sequence:

Program the customer data in the 3300 ICP

Configure the card for Line Side or Trunk Side termination

Install the interface assembly

Install the R2 card

Configure the IMAT database

Connect the computer to the R2 card

Save the IMAT database onto the R2 card

Connect the R2 Card to the PSTN network

Configure for Line Side/Trunk Side Termination

To configure the R2 card for Line Side or Trunk side termination:

1.Attach the anti-static strap to your wrist.

2.Unpack the R2 card and inspect it to ensure that it is not damaged.

3.Ensure the jumper block covers the NT position for the Trunk Side termination and the LT position for Line Side termination.

4.Set the termination impedance switch of the line to the up position for 120 ohms or down for 75 ohms.

Release 3.3

225

Image 233
Contents Hardware User Guide Page Table of Contents SpecificationsSpecifications Before You BeginRelease ICP Hardware User GuideInstalling 111 Installing146 Programming Install Upgrades and FRUsTroubleshooting Viii Before You Begin ICP Hardware User Guide Whats New in this Release? Printing the Hardware User GuideBefore You Begin ICP ReleaseTrademarks DisclaimerCopyright ICP Hardware User Guide ICP ReleaseSafety Instructions ICP Hardware User Guide Specifications ICP Hardware User Guide Signaling and Supervisory Tones Technical Information Technical CharacteristicsDtmf Signaling Dtmf Output Signaling as specified by EIA/TIA 464-CFeature Time-Out Period Description Line and Trunk Support Characteristics NARequirements Specifications Transmission CharacteristicsLoss and Level Matrices CompliancePort Abbreviation ImplementationCountry Requirement Document Brazil Loss Plan Matrix Specifications Australia Loss Plan MatrixICP Hardware User Guide France Loss Plan Matrix Italy Loss Plan Matrix GermanyNetherlands Loss Plan Matrix Latin AmericaNorth America Loss Plan Matrix Specifications New Zealand Loss Plan MatrixSpain Loss Plan Matrix ICP Hardware User Guide Portugal Loss Plan MatrixUnited Kingdom Tone PlansAustralia Tone Plan Tone Frequency Cadence sTone Output Level IONS Brazil Tone PlanSpecifications ICP Hardware User Guide France Tone Plan Special Busy Special Ringback Transfer Dial Voice Mail Italy Tone Output Levels IONS Latin America Tone Frequency Hz Cadence s NetherlandsNew Zealand Tone Plan Tone Plan Frequency Cadence s IONS North AmericaIOPS IACO IACOsPortugal Spain Transfer Dial Voice Mail IACO E2T Compression Conference/ACD Silent Monitor and compression licences Music on Hold and compression Voice mail and compressionFront Panel Controller Mitel Networks 3300 100 Controller ComponentsRear Panel Internal ComponentsConfigurations User System without Compression User System with 32 Compression Channels User System with 30 Voice Mail Ports Specifications Front Panel Configurations User System without Compression User System with 30 Voice Mail Ports User System with 32 Compression Channels Specifications User System with 64 Compression Channels Specifications User System without Compression User System with 32 Compression Channels User System with 64 Compression Channels Controller Environment Controller PowerMitel Networks 3300 Controller Dimensions Connector Type Quantity Signals Comments Function ICP Hardware User Guide Output PowerController PCB Interfaces PCB Printed Circuit Board InterfacesMitel Networks 3300 Universal NSU Components Network Services UnitsHybrid Port DIP Switch Settings Universal NSU DIP Switch SettingsPRI/T1 Mode Connector DIP Switch Settings E1/MF-R2 Mode/Connector DIP Switch Settings3300 R2 NSU Protocols Mitel Networks 3300 R2 NSU ComponentsMitel Networks 3300 BRI NSU Components 3300 R2 NSU DIP Switch SettingsBRI NSU Protocols Mitel Networks 3300 NSU DimensionsNSU Environment Power Supply NSU PowerNSU Pin Allocations ICP Hardware User Guide Operational EnvironmentSignal Name RJ-45 Connector Pin RS-232 Maintenance Connector AllocationBRI Connector Allocation Mitel Networks 3300 ASU Components ASU and Universal ASU Environment ASU and Universal ASU DimensionsPower Supply Input Specifications ASU and Universal ASU PowerCIM Connector Pin Allocations Pair Connector Pin AllocationsSpecifications Pair Connector Pin Allocations ONS Line SpecificationsMusic on Hold Connector Pin Allocations Universal ASU only Paging Connector Pin Assignments Universal ASU onlyONS DC Supervision Parameters ASU ONS Transmission Parameters ASUTransmission Parameters for NA Parameters for UK Transmission Parameters for LA Parameters for EULS Trunk Features 3300 Universal ASU only LS Trunk SpecificationsONS Ringing Parameters ASU ONS Message Waiting Parameters ASULS Trunk Parameters 3300 Universal ASU Music On Hold 3300 Universal ASU onlyASU Variant LS Protocol Trunk Functions Parameters for NA/LA Parameters for UK/EULS Trunk ONS Port Paging 3300 Universal ASU onlySystem Fail Transfer 3300 Universal ASU only Peripheral Node Peripheral Unit Components Specifications Peripheral Unit Environment Peripheral Unit DimensionsPeripheral Unit Cards Peripheral Unit PowerEquipment Power Requirements LS/GS Trunk Card Trunk Card Operation SN-1 and SN-2 Switch SettingsFiber Interface Module Specifications 9400-300-301-NA DID/Loop Tie Trunk Card ICP Hardware User Guide OperationDNI Line Card ONS Line Card Feature Germany China Intl ONS Line Card Variant SpecificationsOPS Line Card ONS CLASS/CLIP Line CardSetting Description Message-Waiting Switch TypesOPS Line Card Specifications Dtmf Receiver Card Dtmf Receiver Card SpecificationsSpecifications Release Digital Service Unit Digital Service Unit Components Digital Service Unit Environment Digital Service Unit DimensionsEquipment Digital Service Unit PowerCept Formatter Card Specification Digital Service Unit CardsCept Formatter Card Card TypeConference Card Cept Interface Assembly Connector Shield GroundingCard Specifications Specifications OperationDS1 Formatter Card DS1/T1 Formatter II CardLink Basic Rate Interface BRI CardPair Pin Color Code BRI Port BRI Cable Pinout for 6-port CardBRI Cable Pinout for 15-port Card BK/GR Dual Port E1 PRI Universal E1 Card Features Dual Port T1 PRI Universal T1 Card FeaturesAdministration of PRI Card Software Programmable Data Inversion NA onlyMultiple Isdn Variants and Configurations Software UpgradesR2 Card R2 signalingLine Signaling Signal direction Event Function Group Register SignalingEvent Group Event Token DescriptionEvent Group a Release 101Event Group B Physical Specifications102 Release 103 R2 Card SpecificationsAdministration of R2 Card Software 104 Telephone Power Options Telephone Power SourcesPower Dongle Cisco compliant Specifications Cisco Switches PowerDsine In-line Power UnitPowerDsine 24PT In-line Power Unit Components Release 105106 ICP Hardware User Guide Front PanelPowerDsine 24PT In-Line Power Unit Power PowerDsine 24PT In-Line Power Unit DimensionsPower Supply PD-PH-6024/AC/48 PowerDsine 24PT In-Line Power Unit Interfaces108 ICP Hardware User Guide Ethernet InterfaceSerial Port Interface Installing ICP Hardware User Guide 110 Installing Installation SiteRequired Components Release 111Parts and Equipment Information and Services112 ApplicationRelease 113 PowerUninterruptible Power Supply Installation Planner System Installation OverviewSystem Administration Tool 114Release 115 116 Hardware Capacity CapacityRelease 117 Parameter Name User / 250 User ControllersParameter Name Number ICP Hardware User Guide Hardware Capacity118 Release 119 250 / 700 User Controller Install the 3300 Controller120 User Controller Install the Hard DriveRelease 121 250 / 700 User Controller Install the System ID ModuleUser Controller 122Release 123 Install DSP ModulesConfigure the Controller 124 Internal Dhcp Server default settings shipped enabledRelease 125 Set the 3300 Controller IP Address126 Install the 3300 Configuration Tool Hardware RequirementsInstall the 3300 Configuration Tool Program FTP User Account and Password Install and Configure the Java Plug-InWindows Click Local Users and GroupsAssign Domain Account Configure IIS 5 SettingsClick New User Click Local Users and Groups Click GroupsSelect the Default Web Site Select Action Properties Install the 3300 Universal NSUSelect Add and Enter default.asp Copy the identitydb.obj fileDriver for Windows 95 and Windows Install for PRI/Q.SIGInstall Direct Connect Device Driver Release 131 Driver for Windows132 Create a Dial-up Network ConnectionDial-up Connection for Windows 95 or Windows Release 133 Install the 3300 R2 NSUDial-up Connection for Windows Connections Install the 3300 BRI NSUConnect the computer to the 3300 R2 NSU Connect the 3300 R2 NSU to the 3300 ControllerInstall the 3300 Universal ASU Setting Up the Maintenance PCNSU Chaining Release 135136 Install the 3300 ASUPeripheral Unit Card Layout Unpack, Position, and Ground the Peripheral UnitRelease 137 Slot Number Card Type138 Connect Fiber Cable to the Peripheral UnitRelease 139 Peripheral Unit Grounding140 Power ConverterCable the Unit to the MDF Install Peripheral Interface CardsAbout Peripheral Interface Cabling Release 141Peripheral Wiring Backplane 142 Cable Connectors Usoc Connector Pin DesignationsUsoc Connector Pin Designations Peripheral Interface Cabling Tables144 Card Slot Card Connections to Cross-Connect FieldCard Slot 1 Connections To Cross-Connect Field Release 145146 Card Slot 2 Connections To Cross-Connect FieldRelease 147 Card Slot 3 Connections To Cross-Connect Field148 Card Slot 4 Connections To Cross-Connect FieldBackplane Code Trunk Plugs Release 149150 Card Slot 5 Connections To Cross-Connect FieldRelease 151 Card Slot 6 Connections To Cross-Connect Field152 Card Slot 7 Connections To Cross-Connect FieldRelease 153 Card Slot 8 Connections To Cross-Connect Field154 Card Slot 9 Connections To Cross-Connect FieldRelease 155 Card Slot 10 Connections To Cross-Connect Field156 Card Slot 11 Connections To Cross-Connect FieldRelease 157 Card Slot 12 Connections To Cross-Connect Field158 Install the Peripheral Slot FIM CarrierRelease 159 Install the Superset HUB160 Unpack, Position, and Ground the DSUConnect Fiber Cable to the DSU DSU Card LayoutDSU Card Layout Release 161162 Install DSU CardsInterface Assembly Release 163 DS1 Interface Assembly and CablingCept Interface Assembly and Cabling 164 Install Wireless DevicesInstall Symbol NetVision MiNET Phone Administrator Tool Release 165 Install 3300 ICP as a Stand-alone IP Gateway166 Install 3300 ICP as a Stand-alone Voice MailInstall the 3300 In-Line Power Unit Power-Up LED Sequence Powering UpRack Mounting Shelf MountingConnecting Cables to End Devices Connecting Cables to the In-Line Power UnitData & Power Out Ports Data In PortsRelease 169 Install the 3300 In-Line Power AdapterInstall 3300 Power Dongle Cisco compliant 170 Pre-Release 3.2 IP PhonesRelease 171 Mixed Release 3.1 and 3.2 NetworkICP Hardware User Guide 172 Install Upgrades and FRUs ICP Hardware User Guide 174 Install Upgrades and FRUs Controller Upgrade OptionsHardware Release 175176 User System Add Voice Mail PortsRelease 177 User System Add 32 Compression Channels178 User System Add 32 Compression Channels and Voice Mail PortsRelease 179 180 Release 181 182 Release 183 User System Add 64 Compression Channels184 Release 185 User System Add 64 Compression Channels and Voice Mail Ports186 User to 700 User System No Compression ChannelsRelease 187 188 User to 700 User System 32 Compression ChannelsRelease 189 User to 700 User System 64 Compression Channels190 User System Add 32 Compression ChannelsRelease 191 192 User System Add 64 Compression ChannelsRelease 193 194 SX-2000 Light to 3300 ICPSX-2000 Micro Light to 3300 ICP Software Software Upgrade Procedure 3.2 toICP to 3300 ICP Release 195Database backup ICP Hardware User Guide Mitel Options PasswordJava Plug-In 196Release 197 Install Upgrades and FRUs Before you beginYou also need 198 ICP Hardware User Guide Upgrade Procedure OverviewBacking up the database Click Maintenance and Diagnostics, then click Back-up Click System Administration ToolInstalling 3.3 software upgrading Release 199200 RebootingSetting your purchased Mitel options Release 201 Restoring the databasePerforming maintenance checks Upgrade SX-2000 Light to 3300 ICP SoftwareResetting to initialize Voice Mail Upgrading IP sets and forcing lease renewalsRelease 203 Upgrade SX-2000 Micro Light to 3300 ICP Software204 Upgrade 3200 ICP to 3300 ICP SoftwareRelease 205 206 Release 207 Controller FRUs Field Replaceable UnitsReplace the Cover 208Dual FIM Module DSP or Echo Canceller Module Release 209210 Hard DriveRelease 211 System ID ModuleUser and 700 User Controllers 212 ICP Hardware User Guide User ControllerRemove a Circuit Card Peripheral Node FRUs214 ICP Hardware User Guide Install a Circuit CardInstall a Power Converter Release 215 Install an Electronic Filter for Cooling Fan ICP Hardware User Guide Install a Cooling FanInstall a Fiber Interface Module FIM 216Install a Dual 10Base-T Interface Assembly Install a Peripheral Switch Controller Card PSCInstall a FIM Release 217218 DSU FRUs Power Down the DSUPower Up the DSU Release 219 Install a BRI Interface AssemblyInstallation Sequence 220 ICP Hardware User Guide Install a BRI CardRelease 221 Install a Cept or DS1 Formatter II CardTesting the Card Install for PRI Qsig Install a PRI CardConnect PRI Card to the Network 222Release 223 Install a Peripheral Resource Card224 Install a FIMRelease 225 Configure for Line Side/Trunk Side TerminationDSU R2 Card R2 Installation Overview 226 ICP Hardware User Guide Install the R2 CardConnect the R2 card to the Pstn network Field Replaceable Units Hardware Install Upgrades and FRUs RJ-45 Conncector Pin FunctionsRelease 227 Pin Function228 Software Options Install Upgrades and FRUs HardwareRelease 229 230 Programming ICP Hardware User Guide 232 Release 233 Overview of ProgrammingUse Imat 234 From the File menu, select Connect to Remote SiteTroubleshooting ICP Hardware User Guide 236 Troubleshoot the 3300 Controller Alarms LEDsFiber Interface Module LEDs Release 237Troubleshoot the 3300 Universal NSU System Hardware ProfileRelease 239 Message Link Controlled Card statusCIM LED State Description LED State MeaningICP Hardware User Guide Fiber Interface Module LEDs Troubleshoot the 3300 R2 NSUR2 NSU Link Status 240Troubleshoot the 3300 Universal ASU Troubleshoot the 3300 BRI NSULEDs Power Status Indications Troubleshoot the 3300 In-Line Power UnitTroubleshoot the 3300 ASU LS Trunk Circuit LEDsMain Power Status Indications AC LED Green TroubleshootingUnit Status Indications Alarm LED Orange Release 243244 Symptom ResolutionOn one port is lit Release 245Troubleshoot Fiber Interface Module Peripheral Unit246 FIM LED State MeaningRelease 247 248 Release 249 Troubleshoot LS/GS Trunk CardICP Hardware User Guide 250 Release 251 Troubleshoot the ONS Line CardTroubleshoot the ONS CLASS/CLIP Card 252 Release 253 Troubleshoot the BRI CardTroubleshoot the Conference Card Troubleshoot the CEPT/DS1 Formatter CardICP Hardware User Guide BRI LEDs 254Faceplate LEDs Troubleshoot the PRI CardPRI Card Link Status Release 255256 Troubleshoot the R2 CardR2 Card Link Status Release 257 TroubleshootingOther
Related manuals
Manual 78 pages 35.43 Kb Manual 26 pages 48.17 Kb Manual 41 pages 28.55 Kb Manual 41 pages 22.9 Kb Manual 22 pages 2.96 Kb Manual 35 pages 43.54 Kb

3300 specifications

The Mitel 3300 is a robust IP-PBX (Private Branch Exchange) designed to cater to the communication needs of businesses of varying sizes. Renowned for its versatility and extensive features, the Mitel 3300 supports both traditional telephony and modern IP-based communications, making it an ideal choice for organizations transitioning into a unified communications environment.

One of the standout features of the Mitel 3300 is its comprehensive set of communication tools. The system supports voice, video, and data services, allowing users to interact through various formats. With an emphasis on mobility, the Mitel 3300 includes mobile applications that enable staff to connect from anywhere, ensuring seamless communication regardless of location.

The Mitel 3300 system is powered by the Mitel Communications Director (MCD) software, which provides central management and control functions. This software is designed to simplify the administration of the phone system, allowing IT teams to manage users, configure features, and monitor system performance through a user-friendly web interface. The platform also supports a wide range of endpoints, including desktop phones, softphones, and mobile clients, ensuring compatibility with existing infrastructure.

Another key characteristic of the Mitel 3300 is its scalability. The system can support small businesses with just a few extensions or large enterprises with thousands of users across multiple sites. This flexibility allows organizations to expand their communication capabilities as they grow, without facing the need for a complete system overhaul.

The Mitel 3300 is built with advanced technologies in mind. Features such as voice-over-IP (VoIP) capabilities enable high-quality audio calls over the internet, reducing costs and improving connectivity. Additionally, the platform supports Unified Communications and Collaboration (UCC) tools, allowing for integrated messaging, presence management, and video conferencing, which further enhance team interactions.

Security is another priority for the Mitel 3300, incorporating features such as encryption and secure access protocols to safeguard communications and sensitive information. This focus on security helps ensure that organizations can rely on the system to maintain privacy and compliance with regulations.

In conclusion, the Mitel 3300 stands out in the realm of business communications with its versatile feature set, scalability, and integration of modern technologies. Its ability to adapt to the evolving needs of businesses, combined with strong security measures, positions it as a reliable solution for organizations looking to enhance their communication infrastructures.