![](/images/new-backgrounds/1188192/18819211x1.webp)
InVision USB-Host to Ethernet Adapter User Guide
Step 2 – Verify MC1000 Configuration
Before you start to install the MC1000 driver software, you must ensure you have successfully completed an ActiveSync between the MC1000 and your computer via the MC1000’s USB cable.
If you have not already configured ActiveSync, please do so now and ensure that you can successfully synchronize between the MC1000 and your PC before you continue. If you need help, refer to your MC1000 Integrator’s Guide, or contact Symbol Technical Support for assistance.
Step 3 – CAB File Installation
To install the CAB file directly onto the MC1000, follow these simple steps:
Connect the MC1000 USB cable to a USB port on your computer.
Open your Windows Explorer and browse to the \MC1000 Software folder to locate the file eConnectCE4.03.02.cab.
Next, open ActiveSync and click on the Explore button.
Then “drag & drop” the eConnectCE4.03.02.cab file onto the \temp icon in the ActiveSync window. You will be prompted that the file may need conversion. Simply click OK to continue.
Step 4 – Install the CAB File
Browse the MC1000 to open the \temp folder. You should find the eConnectCE4.03.02.cab file.
Highlight the eConnect cab file icon and press the Enter button to install the file, which will bring up the Install Window.
Do NOT choose a destination folder. Highlight the OK button in the top right corner of the display window and press Enter button.
The CAB file is automatically removed after the installation is complete.
Mobility Electronics, Inc | 3 |
|
|