Mobility Electronics manual Connecting the MC1000 to the PS6U1UHE

Page 9

InVision USB-Host to Ethernet Adapter User Guide

Connecting the MC1000 to the PS6U1UHE

Setting up your PS6U1UHE is easy and includes only these simple steps.

1.Connect the Power Supply (PN 170140-000), as shown below.

2.Connect the MC1000 to the PS6U1UHE using the USB Mini-A to Mini-B Cable (PN 170373-000), as shown below.

3.Connect the Ethernet Cable to the network (see the Section “Connecting the PS6U1UHE to your Network for more information.)

Mobility Electronics, Inc	6

Image 9

Contents PS6U1UHE Trademarks Contents Ports Function IntroductionGetting Started Connecting to the PS6U1UHEBefore You Begin Unpack the softwareVerify MC1000 Configuration CAB File InstallationInstall the CAB File Configuring eConnect Finishing Up Connecting the MC1000 to the PS6U1UHE Partnerships with More than One Desktop/Laptop PC Connecting the PS6U1UHE to your NetworkUninstall eConnect When You Can’t Use DhcpManual Removal Troubleshooting Product/Technical SupportProduct Registration Symptom It won’t ActiveSync Possible Cause Action Other ActiveSync ProblemsRadio Frequency Interference Requirement FCC Statement Appendix a Regulatory InformationAppendix B Warranty Part Number 190130-000 Rev a