Orbit II Disc-to-Disc Copier Reference Manual – Revision I
Section 8 Maintenance
8.1 Routine Maintenance:
The Orbit II Stand Alone
To clean the outside cabinet and plastic panel:
•Turn off Orbit II’s external power supply.
•Use a clean lint free cloth moistened with a weak solution of dishwashing detergent in warm water.
•Dry the unit immediately with a clean lint free cloth.
If debris accumulates within the Orbit II Loader you should gently wipe the affected surfaces with a lint free cloth, use a small shop vacuum, and/or blow out the contamination with compressed air. Make sure all of your blank media, masters, and copies are protected while you are cleaning your Orbit II System.
29