Mega System Tech RS422, RS485, RS232 manual Network, IP Address

Page 17

Chapter 5: NET101 Web Manager

Fig.18 NET101 Configuration Menu

2.2.1Network

This option determines NET101 Network settings.

i.IP Address

Fig.19 NET101 IP Address Settings

IP Address

If you want to fix the IP address, enter your chosen IP address here. Otherwise go to “Obtain an IP address” and choose “via DHCP”

Subnet Mask

This item sets NET101 Subnet Mask. The value is normally 255.255.255.0

Gateway

This item is to set NET101 Gateway.

Obtain an IP address

NET101 User’s Manual

-15-

Image 17

Contents Technical Support and Contact Information Copyright InformationContents Introduction FeaturesNetworking with NET101 NET101 using a Virtual COM Port in Windows modeNET101 Description Package ContentsNET101 DB-9 PIN Assignment DB-9 Pin No RS-232 RS-422 RS-485 NET101 DB-9 Pin AssignmentRxD TxD TxD+Color Condition / Description NET101 IndicatorsNET101 installation flowchart Installation ProcedureInstallation Procedure Hardware InstallationNET101 Installing Netility Using Netility to Setup IP & Update FirmwareUsing Netility Network SelectionIPAddress ConfigureAdvanced Upgrade FirmwareNetility Password Refresh AboutInformation Configuration Help Configure NET101 by WEB BrowserIntroduction NET101 Web Manager InterfaceInformation ConfigurationSystem Information Network StatusIP Address NetworkIv. Dynamic DNS Ii. DNS Server IPIii. Ethernet PPPoE NET101 PPPoE settingWEB / Telnet System Time NET101 WEB / Telnet SettingsConnect Status Mode DescriptionConnection Mode Type Description Iii. Operation Mode Mode Type DescriptionIi. Connection Type Connection Status Description Choose DescriptionEvent Log Method 2 Using FTP Appendix a Update NET101 FirmwareMethod 1 Using Netility Ftp//192.168.50.179 Method 3 Using IE BrowserFtp//adminpassword@192.168.50.179 Appendix a Methods to Update NET101 Firmware Appendix B NET101 Virtual COM Port Appendix B NET101 Virtual COM Port