Mega System Tech RS422, RS485 Using Netility to Setup IP & Update Firmware, Installing Netility

Chapter 4: Using Netility to Setup IP & Update Firmware

Chapter 4: Using Netility to Setup IP & Update Firmware

Section 1. Installing Netility

1.Insert the Utility CD into the CD-ROM drive and execute Netility.exe

2.After installation is completed, ‘Netility’ group will appear in Windows ’Start’ Æ ‘Program Group’.

Fig.8 Netility Group

3. Click “Netility” to start the program.

Section 2. Using Netility

The Netility main menu is shown below. The selection menu is located on the left. The device, hardware, firmware and IP address connected to a LAN are displayed on the right.

nSelect Network card in you system

oConfigure iCAMView p Update iCAMView Firmware

q About Netility

rConduct another search for iCAMViews on network

Fig.9 Netility Main Menu

2.1 Network Selection

Once Netility starts-up, it will automatically search for the computer’s Network card (If not, click on “Network Selection” on the main menu to start the search). A pop-up window will show the available Network Adapter.

Next, select the Network Adapter, which is connected to the LAN, and click ‘OK’ to return to the main menu. NET101 will now appear in the main menu display area.

NET101 User’s Manual -9-