Mega System Tech RS232, RS485, RS422 manual NET101 PPPoE setting

Page 19

Chapter 5: NET101 Web Manager

None (Choose this only if you have a Static IP)

3322.org

dhs.org

DynDNS(Dynamic)

DynDNS(Custom)

Myddns.com

Zive.org

Domain Name

Enter the Domain Name you have created from one of the three websites.

Login Name

Enter your login name for the above domain name. You should have this when you register with the above DDNS provider.

Login Password

Enter your password. You should have this when you register with the above DDNS provider.

Use external STUN server to get Public IP to register

Enable/disable using the external IP for DDNS server registration. If this function is enabled, the NET101 will get the external IP by the help of STUN server, and then use this IP to register the IP of the DDNS server.

Primary STUN Server IP

Input the primary STUN server IP. The NET101 will use this server’s help to get the external IP address. The default IP is 66.7.238.210.

Secondary STUN Server IP

Input the secondary STUN server IP. The NET101 will use this server’s help to get the external IP address when the primary STUN server has no respond. The default IP is 67.153.142.67.

v.PPPoE

Use this option to allow NET101 to connect to the internet using your xDSL modem. Once set-up, NET101 will be able connect to the Internet directly without going thru a PC.

Fig.23 NET101 PPPoE setting

When Connection should be made

The user has a choice of;

Disabled

: Default setting.

NET101 User’s Manual

-17-

Image 19
Contents Technical Support and Contact Information Copyright InformationContents Introduction FeaturesNetworking with NET101 NET101 using a Virtual COM Port in Windows modeNET101 Description Package ContentsTxD TxD+ NET101 DB-9 Pin AssignmentNET101 DB-9 PIN Assignment DB-9 Pin No RS-232 RS-422 RS-485 RxDColor Condition / Description NET101 IndicatorsNET101 installation flowchart Installation ProcedureInstallation Procedure Hardware InstallationNET101 Network Selection Using Netility to Setup IP & Update FirmwareInstalling Netility Using NetilityIPAddress ConfigureNetility Password Upgrade FirmwareAdvanced Refresh AboutNET101 Web Manager Interface Configure NET101 by WEB BrowserInformation Configuration Help IntroductionNetwork Status ConfigurationInformation System InformationIP Address NetworkIii. Ethernet Ii. DNS Server IPIv. Dynamic DNS PPPoE NET101 PPPoE settingWEB / Telnet System Time NET101 WEB / Telnet SettingsConnection Mode DescriptionConnect Status Choose Description Iii. Operation Mode Mode Type DescriptionMode Type Description Ii. Connection Type Connection Status DescriptionEvent Log Method 1 Using Netility Appendix a Update NET101 FirmwareMethod 2 Using FTP Ftp//adminpassword@192.168.50.179 Method 3 Using IE BrowserFtp//192.168.50.179 Appendix a Methods to Update NET101 Firmware Appendix B NET101 Virtual COM Port Appendix B NET101 Virtual COM Port