Mega System Tech RS485, RS232, RS422 manual Hardware Installation, Installation Procedure

Page 9

Chapter 3: NET101

Chapter 3: Hardware Installation

The following details the installation procedure for NET101.

Section 1. Installation Procedure

Step 1:

Connect the DB-9 to either a RS232 / 422 or 485 serial port of the device.

Step 2:

Connect one end of the Ethernet cable to a hub / router.

NET101 User’s Manual

-7-

Image 9

Contents Technical Support and Contact Information Copyright InformationContents Introduction FeaturesNetworking with NET101 NET101 using a Virtual COM Port in Windows modeNET101 Description Package ContentsNET101 DB-9 PIN Assignment DB-9 Pin No RS-232 RS-422 RS-485 NET101 DB-9 Pin AssignmentRxD TxD TxD+Color Condition / Description NET101 IndicatorsNET101 installation flowchart Installation ProcedureInstallation Procedure Hardware InstallationNET101 Installing Netility Using Netility to Setup IP & Update FirmwareUsing Netility Network SelectionIPAddress ConfigureUpgrade Firmware Netility PasswordAdvanced Refresh AboutInformation Configuration Help Configure NET101 by WEB BrowserIntroduction NET101 Web Manager InterfaceInformation ConfigurationSystem Information Network StatusIP Address NetworkIi. DNS Server IP Iii. EthernetIv. Dynamic DNS PPPoE NET101 PPPoE settingWEB / Telnet System Time NET101 WEB / Telnet SettingsMode Description ConnectionConnect Status Mode Type Description Iii. Operation Mode Mode Type DescriptionIi. Connection Type Connection Status Description Choose DescriptionEvent Log Appendix a Update NET101 Firmware Method 1 Using NetilityMethod 2 Using FTP Method 3 Using IE Browser Ftp//adminpassword@192.168.50.179Ftp//192.168.50.179 Appendix a Methods to Update NET101 Firmware Appendix B NET101 Virtual COM Port Appendix B NET101 Virtual COM Port