Chapter 5: NET101 Web Manager
on TCP/IP. For detailed information about MODBUS gateway, please refer to the specifications of MODBUS.
Login Name
Enter the login name here when using NET101 in the Slave mode. Either the Master NET101 or the Virtual COM port driver has to know the account and password to use the slave NET101. The account / password is to protect against unauthorised use of NET101 to access the serial communication data.
Login Password
Enter a login password here when using the NET101 in the Slave mode.
ii. Connection Type |
|
Connection Status | Description |
RS232 | To select the DB9 serial port signalling in RS232 mode. |
RS422 | To select the DB9 serial port signalling in RS422 mode. |
RS485 | To select the DB9 serial port signalling in RS485 mode. |
iii. Operation Mode |
|
Mode Type | Description |
Half Duplex | To select the RS485 communication in Half Duplex |
| mode. |
Full Duplex | To select the RS485 communication in Full Duplex |
| mode. |
Tx Polarity |
|
Mode Type | Description |
Normal | To set the transmit data polarity in normal mode. |
Invert | To set the transmit data polarity in Invert mode. |
Rx Polarity |
|
Choose | Description |
Normal | To set the receive data polarity in normal mode. |
Invert | To set the receive data polarity in invert mode. |
Click “Apply” to confirm selection, otherwise click “Reset”
2.3 Help 2.3.1 About
Displays the following information about NET101;
NET101 User’s Manual |