Color Config Submenu

•RGB Studio: accommodates digital 480i video using the RGB limited range (16-235) inputs.

•RGB PC: accommodates full range RGB (0-255) inputs.

•YUV 601: accommodates for Rec. 601 SDTV YUV colorspace inputs.

•YUV 709: accommodates for Rec. 709 HDTV YUV colorspace inputs.

The monitor’s default setting is RGB PC.

■DVI-D CSC Mode (DVI-D input only)

Use the DVI-D CSC Mode to accommodate for four different types of colorspace inputs. This setting will only affect your DVI-D and HDMI inputs.

•RGB Studio: accommodates digital 480i video using the RGB limited range (16-235) inputs.

•RGB PC: accommodates full range RGB (0-255) inputs.

•YUV 601: accommodates for Rec. 601 SDTV YUV colorspace inputs.

•YUV 709: accommodates for Rec. 709 HDTV YUV colorspace inputs.

The monitor’s default setting is RGB PC.

■HDMI CSC Auto (HDMI input only, via the DVI-I interface)

The HDMI CSC Auto setting is used to accommodate newer HDMI interfaces that send colorspace signaling in the HDMI data stream. If this setting is set to On, the monitor will automatically determine which colorspace setting to use. If this setting is set to Off, or your HDMI signal does not contain colorspace signaling, the DVI-D CSC Mode described above will determine the colorspace configuration.

Use the Color Configuration submenu to adjust the Red, Green and Blue Offset and Gain values of the two SDI channels, the DVI-D input and DVI-A input.

Each column adjusts a particular input channel, from SDI1 and SDI2 to the DVI-I input. For the DVI-I input, you can adjust the Offset and Gain for either a DVI-D or DVI-A input.

The Reset option allows you to return to the default settings for each individual channel.

System Config Submenu

Use the System Configuration submenu to control various system parameters.