Installation and Initial Setup
■Unpacking
Carefully unpack the V-R171X-DLW monitor and verify that the following items are included:
•V-R171X-DLW Monitor
•V-PS12-5V-1 Power Supply with Twist-Lock Connector
•Operating Instructions
Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States, call +1 (310) 333-0606.
■Installation
The V-R171X-DLW can be combined with a desktop stand for desktop use. (Marshall Part V-ST15).
VESA standard 75mm hole patterns allows custom mounting installations. Marshall Electronics can provide an optional VESA stand with pivot and tilt as well. (Marshall Part VP-LCD171H-ST-01).
V-R171X-DLW with desktop stand (Marshall Part Number V-ST15)
Desktop Stand Mounting Holes
■Connections, Power-On and Initial Setup
Plug the V-PS12-5V-1 power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the Twist-Lock connector to the back of the monitor. Connect the required cables for video signals input and output. (Power must be applied to the V-R171X-DLW for the active loop-though output to be activated.) The monitor defaults to ‘ON’ when power is supplied.
