Marshall electronic V-R171X-DLW User-Definable Function Buttons, Saving and Loading User Presets

Page 18

System Configuration Submenu

■User-Definable Function Buttons

Use the Function 1, Function 2, Function 3 and Function 4 menu items to define each function button on the front panel of the monitor. The following options are available for each button:

•

Marker

Toggle between different Screen Markers

•

Center Marker

Display/hide the Center Marker

• Marker Backgrd

Change how markers are displayed on the screen

•

IMD State

Display/hide IMD text

•

Anc. Time Code

Display/hide time code

• OSD Tally

Rotate amongst types of OSD Tally

•

Audio Monitor

Display/hide audio presence indicator

•

CC Monitor

Display/hide the Closed Caption Presence indicator

• Waveform Mode

Change the data displayed on the Waveform monitor

• Overlay Position

Change the position of the WFM Overlay in DLW Overlay Mode

•

Limits

Toggle the Limits option of the Waveform Monitor On or Off

•

Aspect Ratio

Toggle between 4:3 and 16:9 aspect ratios

•

Pixel to Pixel

Enable/disable Pixel-to-Pixel mode

• Ctemp/Gamma

Rotate amongst color temperature settings

•

Blue Only

Enable/disable Blue Only mode

• Monochrome

Enable/disable Monochrome mode

■Saving and Loading User Presets

Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. Each Preset saves all monitor settings except for IMD configuration.

•Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded by selecting MFG. (Factory defaults cannot be overwritten.)

•Use To perform a full system restore, which resets ALL adjustable fields on the monitor to their “fresh-from- factory” state, press the Power, F1 and F2 button simultaneously. Note: You will lose ALL user adjustable settings on your monitor.

•Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operating Instructions This page intentionally left blank Contents Features 1920 x 1200 Full Resolution 17 PanelConnections, Power-On and Initial Setup Installation and Initial SetupInstallation UnpackingFront Panel Features Power ButtonRear Panel Features RS-422/485 Serial InterfaceCompatible Input Formats Following SDI standards are supported by the V-R171-DLWDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu Marker Setup Submenu On-Screen MenuMarkers Video Config Submenu Marker BackgroundCenter Marker Pixel-to-Pixel Mode Monochrome ModeBlue-Only Mode Aspect Ratio SettingsCurtain Color Analog Phase DVI-Analog or VGA input onlyDVI-A CSC Mode DVI-Analog input only Ctemp/GammaDVI-D CSC Mode DVI-D input only Color Config SubmenuSystem Config Submenu Hdmi CSC Auto Hdmi input only, via the DVI-I interfaceSaving and Loading User Presets User-Definable Function ButtonsOSD Config Submenu IMD StateStatus Display OSD Tally LED TallyAnc. Timecode OSD Timeout Audio MonitorCC Monitor Closed Captioning IMD ID # IMD Config SubmenuOverview IMD Group #Tally Source IMD Baud RateIMD Name S/N IMD Fixed Align IMD Tally ModeIMD Fixed Color IMD Fixed StringMode ServiceClosed Captioning Submenu ColorWaveform Mode Wave/Vector SubmenuLimits Waveform ScaleColorize Waveform Limit MaxOverlay Position Ancillary SubmenuVectorscope Targets Overlay TransparencyService Submenu Software Version DisplaySpecifications PanelScreen Cleaning MaintenanceWarranty Faceplate DustingBurn-In Warning Marshall ELECTRONICS, INC
Top Page Image Contents