Marshall electronic V-R171X-DLW manual Front Panel Features, Power Button

Page 6

Front Panel Features

Power Button

Turn the monitor off or on by pressing the power button. The LED on the power button is at maximum illumination when the unit is OFF. The LED is at minimum illumination when the unit is on.

Input Channel Buttons

Pressing SDI 1 or SDI 2 will select HDSDI-SDI Video Inputs 1 or 2, respectively. When a channel is activated, the LED on the channel will illuminate. When displaying Dual Link formats, both LEDs will illuminate simultaneously.

DVI Button

Pressing the DVI button selects the DVI-I input. When activated, the LED will light.

User-Definable Function Buttons

Four user-definable function buttons can be used for direct access to various settings. Functions are assigned using the on-screen menu.

Layout Button

Use this button to switch between the four available layouts on the V-R171X-DLW.

RotoMenu™ Knob

The RotoMenu™ knob allows for accessing and navigating the main menu, using only a single control.

Image Adjustment Knobs

Use the image adjustment knobs to adjust color saturation, brightness and contrast of the image. The status of each image adjustment parameter is shown on the top left of the screen, with values ranging from 0 to 100. Pressing a knob once displays the current value. Pressing a knob twice resets the corresponding adjustment to the default setting.

6

Image 6
Contents Operating Instructions This page intentionally left blank Contents Features 1920 x 1200 Full Resolution 17 PanelConnections, Power-On and Initial Setup Installation and Initial SetupInstallation UnpackingFront Panel Features Power ButtonRear Panel Features RS-422/485 Serial InterfaceCompatible Input Formats Following SDI standards are supported by the V-R171-DLWDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu Marker Setup Submenu On-Screen MenuMarkers Video Config Submenu Marker BackgroundCenter Marker Pixel-to-Pixel Mode Monochrome ModeBlue-Only Mode Aspect Ratio SettingsCurtain Color Analog Phase DVI-Analog or VGA input onlyDVI-A CSC Mode DVI-Analog input only Ctemp/GammaDVI-D CSC Mode DVI-D input only Color Config SubmenuSystem Config Submenu Hdmi CSC Auto Hdmi input only, via the DVI-I interfaceSaving and Loading User Presets User-Definable Function ButtonsOSD Config Submenu IMD StateStatus Display OSD Tally LED TallyAnc. Timecode OSD Timeout Audio MonitorCC Monitor Closed Captioning IMD ID # IMD Config SubmenuOverview IMD Group #Tally Source IMD Baud RateIMD Name S/N IMD Fixed Align IMD Tally ModeIMD Fixed Color IMD Fixed StringMode ServiceClosed Captioning Submenu ColorWaveform Mode Wave/Vector SubmenuLimits Waveform ScaleColorize Waveform Limit MaxOverlay Position Ancillary SubmenuVectorscope Targets Overlay TransparencyService Submenu Software Version DisplaySpecifications PanelScreen Cleaning MaintenanceWarranty Faceplate DustingBurn-In Warning Marshall ELECTRONICS, INC