Marshall electronic V-R171X-DLW manual Maintenance, Warranty, Screen Cleaning, Faceplate Dusting

Page 31

Specifications (continued)

Maintenance

Screen Cleaning

Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro- fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the screen to avoid damaging the LCD.

Faceplate Dusting

Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface, attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.

Warranty

Marshall Electronics warranties to the first consumer that this V-R171X-DLWLCD monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve products and product features, specifications may change without notice.

31

Image 31
Contents Operating Instructions This page intentionally left blank Contents 1920 x 1200 Full Resolution 17 Panel FeaturesUnpacking Installation and Initial SetupInstallation Connections, Power-On and Initial SetupPower Button Front Panel FeaturesRS-422/485 Serial Interface Rear Panel FeaturesFollowing SDI standards are supported by the V-R171-DLW Compatible Input FormatsDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu On-Screen Menu Marker Setup SubmenuMarkers Marker Background Video Config SubmenuCenter Marker Aspect Ratio Settings Monochrome ModeBlue-Only Mode Pixel-to-Pixel ModeCtemp/Gamma Analog Phase DVI-Analog or VGA input onlyDVI-A CSC Mode DVI-Analog input only Curtain ColorHdmi CSC Auto Hdmi input only, via the DVI-I interface Color Config SubmenuSystem Config Submenu DVI-D CSC Mode DVI-D input onlyUser-Definable Function Buttons Saving and Loading User PresetsIMD State OSD Config SubmenuStatus Display LED Tally OSD TallyAnc. Timecode Audio Monitor OSD TimeoutCC Monitor Closed Captioning IMD Group # IMD Config SubmenuOverview IMD ID #IMD Baud Rate Tally SourceIMD Name S/N IMD Fixed String IMD Tally ModeIMD Fixed Color IMD Fixed AlignColor ServiceClosed Captioning Submenu ModeWave/Vector Submenu Waveform ModeLimit Max Waveform ScaleColorize Waveform LimitsOverlay Transparency Ancillary SubmenuVectorscope Targets Overlay PositionSoftware Version Display Service SubmenuPanel SpecificationsFaceplate Dusting MaintenanceWarranty Screen CleaningBurn-In Warning Marshall ELECTRONICS, INC