Minolta CD-10 instruction manual Names of Parts

Page 11

3. Names of Parts

This drive unit consists of the following parts:

FRONT PANEL

1

2

6

3

4

5

(1)Power Switch

By sliding the switch back and forth from left to right, power is turned "on" and "off".

(2)Power Indicator Lamp

When power is on, light is green.

(3) Access Indicator Lamp

Indicates the access status of the PC card reader.

When in a read/write state, the lamp is green (even if a PC card is not inserted in the slot, the lamp will blink occasionally) .

(4) Lock Indicator Lamp

The lock light is lit when software or data on the PC card is be- ing accessed or is active. PC cards should not be removed when this lamp is on.

(5) Eject Button

Pushing this button ejects the PC card.

(6) Card Slot

Type I, II, and III PC cards may be inserted.

Getting Started

9

Image 11
Contents Troubleshooting Specifications Page Preface Safety Precautions and handling PrecautionsMaintenance of the cabinet Power sourcePrecautions for connection Precautions for transportationFCC Radio Frequency Interference Warning Digital Cameras PC CardsPC Card Adapter Sets Table of Contents Product Outline Using with Macintosh computersUsing with Windows 95 and IBM PC/AT compatible computers Accessories Names of Parts Rear Panel Using without other Scsi devices Connecting with a ComputerUsing with other Scsi devices Switch Scsi ID For IBM PC/AT compatible computers Turning on the powerInserting the PC card set Basic OperationsPage Removing the PC card set When the access indicator is litWhen the lock indicator is lit For IBM PC/AT compatible computers The lock indicator does Functions of Mac-PC Manager Lite Using with a MacintoshInstallation procedure for Mac-PC Manager Lite Windows Using IBM PC/AT Compatible ComputersChecking the EZ-SCSI driver Windows 3.1 and DOSApplicable environment ASPI8DOS.SYS To replace the ASPIDISK.SYS driverCause TroubleshootingSymptom Macintosh SystemsIBM PC/AT Systems Symptom Cause Corrective MeasureMinolta Hong Kong Limited For more informationOperating temperature and humidity SpecificationsPower requirements Power consumption 0.2A9222-2755-91 9610-A610