Minolta CD-10 instruction manual To replace the ASPIDISK.SYS driver, ASPI8DOS.SYS

Note: The following SCSI boards and ASPI managers can be used by the CD-10 drive with IBM PC/AT compatible computers:

ASPI Manager:	SCSI board:
ASPI2DOS.SYS	AHA-1510A, AHA-1522A, APA-1460
ASPI4DOS.SYS	AHA-1542CF
ASP7DOS.SYS	AHA-2742-AT, AHA-2840A
ASPI8DOS.SYS	AHA-2940

SCSI boards which use the AIC-7970 SCSI protocol chip in standard mode.

The contents of the CONFIG.SYS file are as follows. Use this for your installation.

(AHA-1542CF, EZ-SCSI V3.04, MS-DOS 6.20, and Win- dows 3.1)

DEVICE=C:\SCSI\ASPI4DOS.SYS /D

DEVICE=C:\SCSI\ASPIDISK.SYS /D

DEVICE=C:\DOS\SETVER.EXE

DEVICE=C:\DOS\HIMEM.SYS

DOS=HIGH

DEVICE=C:\DOS\EMM386.EXE

FILES=30

STACKS=9,256

To replace the ASPIDISK.SYS driver

The attached ASPIDISK floppy disk stores the ASPIDISK.SYS driver, which can read the data recorded on a PC card. Copy this file into the directory in which EZ- SCSI is installed.

(1)Insert the attached ASPIDISK floppy disk.

(2)Copy the ASPIDISK.SYS file stored in the ASPIDISK floppy disk into the directory in which EZ-SCSI is in- stalled.

(3)Remove the ASPIDISK floppy disk then restart the computer.

IBM/Windows

23