Minolta CD-10 instruction manual Using with other Scsi devices

NOTE: The cable included in this package is a D-Sub25 to 50-pin full-pitch, intended for use with most IBM PC/AT compatible computers. Macintosh users may require a D-Sub25 to D-Sub25 SCSI cable, available at most computer stores.

4-2 Using with other SCSI devices

Since the SCSI standard supports connection to one computer and up to seven SCSI devices (including SCSI devices built into the computer), you can use several CD-10 card drives in series or can connect the CD-10 drive to other SCSI device(s).

Plug one end of the SCSI cable to the SCSI connector at the rear of the computer and the other into the SCSI connector at the rear of this drive unit. Securely plug the cable end into the connector then se- cure it (with clamps or screws built into the SCSI cable).

The order of the SCSI devices to be connected can be changed.

Card Drive CD-10

SCSI Cable

12