Minolta CD-10 Power source, Proper places for use and storage, Precautions for connection

Page 5

Power source

Use a standard domestic household power supply (100 to 240V, 50/60Hz).

Proper places for use and storage

-This unit is to be used at temperatures between +5°C and +40°C and at relative humidities between 20% and 80% (no condensation).

-Do not use or store the unit in an excessively hot or cold place.

-Do not use or store the unit in a dusty place or in direct sunlight.

-Do not use or store the unit in a place subject to excessive vibra- tion or in an unstable place.

-Do not place the unit close to a system which generates strong magnetic fields(motor,transformer, television, loudspeaker, mag- net etc.).

-Do not obstruct vents, it may cause the internal temperature to rise. Do not stack the units. Do not use in a non ventilated area.

Precautions for connection

When connecting this unit to a personal computer or any other equipment, always first turn off the main power of the equipment to be connected.

Precautions for transportation

-Disconnect cables and remove the PC card before transporting the unit.

-Use the cardboard box in which the unit was initially packed.

-This is a precision device. Do not subject to excessive shock or vibration.

Maintenance of the cabinet

-Do not use thinner, benzene, insecticide and other volatile substances to clean the cabinet.

-Clean the cabinet and front panel with a soft cloth. Remove dirt with a soft cloth moistened with a small amount of neutral deter- gent diluted with water. Wipe dry after cleaning.

-Disconnect the power plug from the outlet before performing any maintenance on the unit.

Getting Started

3

Image 5
Contents Troubleshooting Specifications Page Preface Safety Precautions and handling PrecautionsPrecautions for connection Power sourcePrecautions for transportation Maintenance of the cabinetFCC Radio Frequency Interference Warning Digital Cameras PC CardsPC Card Adapter Sets Table of Contents Product Outline Using with Macintosh computersUsing with Windows 95 and IBM PC/AT compatible computers Accessories Names of Parts Rear Panel Using without other Scsi devices Connecting with a ComputerUsing with other Scsi devices Switch Scsi ID For IBM PC/AT compatible computers Turning on the powerInserting the PC card set Basic OperationsPage Removing the PC card set When the access indicator is litWhen the lock indicator is lit For IBM PC/AT compatible computers The lock indicator does Functions of Mac-PC Manager Lite Using with a MacintoshInstallation procedure for Mac-PC Manager Lite Windows Using IBM PC/AT Compatible ComputersChecking the EZ-SCSI driver Windows 3.1 and DOSApplicable environment ASPI8DOS.SYS To replace the ASPIDISK.SYS driverSymptom TroubleshootingMacintosh Systems CauseIBM PC/AT Systems Symptom Cause Corrective MeasureMinolta Hong Kong Limited For more informationPower requirements SpecificationsPower consumption 0.2A Operating temperature and humidity9222-2755-91 9610-A610