Sanyo ECD-T1560 manual Electrical Connections, Wiring, Antenna Socket, +12V Accessory/Switched Red

ELECTRICAL CONNECTIONS

WIRING
							(BLACK)
							CD CHANGER
							AND SIRIUS RECEIVER
							CONNECTOR SOCKET
Antenna Socket			Rch Red	(Brown)
			Lch White	(Brown)
			FRONT LINE OUT CABLE
			Rch Red	(Gray)
			Lch White	(Gray)
			REAR LINE OUT CABLE		(GREEN)
			SUBWOOFER CABLE
					(BLACK)
REMOTE IR SENSOR				WIRE REMOTE SOCKET
Power Antenna/Amplifier Turn On (Blue/Red)
	Ground Wire (Black)
+12V Constant Power Supply (Yellow)
+12V Accessory/Switched (Red)
	2-SPEAKER SYSTEM			4-SPEAKER SYSTEM
Rear Left	-	- (GREEN/BLACK)	Rear Left		-	-	(GREEN/BLACK)
	+	+ (GREEN)			+	+ (GREEN)
Speaker			Speaker
Front Left	-	- (WHITE/BLACK)	Front Left		-	-	(WHITE/BLACK)
	+	+ (WHITE)			+	+ (WHITE)
Speaker			Speaker
Front Right	-	- (GRAY/BLACK)	Front Right		-	-	(GRAY/BLACK)
	+	+ (GRAY)			+	+ (GRAY)
Speaker			Speaker
Rear Right	-	- (VIOLET/BLACK)	Rear Right		-	-	(VIOLET/BLACK)
	+	+ (VIOLET)			+	+ (VIOLET)
Speaker			Speaker

CAUTION

•DO NOT connect any speaker wires to the metal body or chassis of the vehicle.

•DO NOT connect the speaker common (–) wires to each other.

•Connect each speaker wire directly to each speaker terminal.

•All speaker common (–) wires must remain floating.

1.Antenna Socket

•Insert the plug from the antenna installed in your vehicle into this socket. (If your vehicle has a dual antenna system, a dual antenna to single antenna cable adaptor may be required.)

2. + 12V Constant Power Supply (Yellow)

•Connect this wire to the +12V power terminal which receives power continuously.

3. +12V Accessory/Switched (Red)

•Connect this wire to the terminal which receives power while the ignition switch is ON or in the ACCESSORY position.

•If the ignition switch does not have on ACC position, connect this wire to a +12V power terminal which receives power continuously. (Same as item 2.)

25