USING THE FRONT PANEL
1.When the ignition key is switched to “ACC
ON”, the panel of the unit will change from State 1 to State 2, the hidden panel will turn up.
2.Press 
(power) button to turn on the unit. Then press 
(eject) button, the panel will turn down to horizontal position (see State 3).
3.Insert a disc in the disc slot, the panel will automatically turn up to State 2. Press 
(eject) button again, the panel will turn down to eject the disc. If you don’t insert a disc in again, the panel will automatically turn up in about 10 seconds. If you don’t want to wait, press 
(eject) button, the panel will also turn up.
4.When the ignition key is switched to “ACC OFF”, the front panel will change from State 2 to State 1 if there is nothing plugged into the AUX IN jack.
If there is a portable audio player connected to the unit through the AUX IN jack, the front panel will remain State 2.
RETURNING TO THE INITIAL SETTINGS
When the front panel is open, you can find the RESET button on the top right corner of the panel. Press the button, the Microcomputer of the unit returns to the initial settings. If the display window is not properly shown or the unit malfunctions, press the RESET button.
Reset button
5