Sanyo ECD-T1560 Radio Operation, Switching to Radio MODE…………………….…1, Storing Preset Stations

RADIO OPERATION

SEL SET 50W x 4

IR

VOLUME

A-Z/0-9

EQ

ECD-T1560

LOUD/ENT/ENT

BAND

DSP

LOC/S-MOD	MUT	MON	P.SCN/MP3					CAT/DIR		SW MANU/SKIP/CH	AUX IN
			AS/PS	1 PAU	2 SCN	3 RPT	4 SHF	5 DISC	6 DISC	MOD

SWITCHING TO RADIO MODE…………………….…(1)

Press MOD/SW button (1) to select radio mode, the radio mode appears in the display together with the memory band and frequency.

SELECTING THE FREQUENCY BAND……………..(2)

At radio mode, press BAND/LOUD/ENT button (2) quickly to select the desired band. The band will change in the following order:

FM1 FM2 FM3 AM

RADIO TUNING…………………………………………(3)

Press the MANU/SKIP/CH or button (3) shortly to activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.

AUTOMATIC MEMORY

STORING & PROGRAM SCANNING…………………(4)

-Automatic memory storing

Press AS/PS/P.SCAN/MP3 button (4) for several seconds, the radio searches for the six strongest stations and stores them into the presets of the currently selected band. While searching, ”LOC” appears on the display.

-Program scanning

Press AS/PS/P.SCAN/MP3 button (4) shortly to scan preset station in memory.

STORING PRESET STATIONS .................................(5)

The preset buttons (5) can be used to store 6 stations in each band (FM 1, FM 2, FM 3 and AM) for convenient access to your favorite stations.

•Programming stations ..... 1. Select the desired band, then tune in the station you want to store in memory.

2.Press and hold one of the preset buttons (5) for more than 2 seconds until the corresponding preset button number appears. Repeat steps 1. and 2. to program additional stations.

8