Sanyo ECD-T1560 manual Sirius Operation, Switching to Sirius MODE……………………..…1

SIRIUS OPERATION

SEL SET 50W x 4

IR

VOLUME

A-Z/0-9

EQ

ECD-T1560

LOUD/ENT/ENT

BAND

DSP

LOC/S-MOD	MUT	MON	P.SCN/MP3					CAT/DIR		SW MANU/SKIP/CH	AUX IN
			AS/PS	1 PAU	2 SCN	3 RPT	4 SHF	5 DISC	6 DISC	MOD

SWITCHING TO SIRIUS MODE……………………..…(1)

Press MOD button (1) to select Sirius mode.

SELECTING USER-PRESET CHANNEL……………..(2)

At Sirius mode, the Sirius user-preset channel group (3 groups) is toggled cyclically through the group by quickly pressing the BAND/LOUD/ENT button (2).

The channel will change in the following order:

SR1 SR2 SR3

SELECTING CHANNEL UP/DOWN……………………(3)

Press the MANU/SKIP/CH or button (3) to select the channel up or down.

SEARCHING STATION…………………………….……(4)

When the AS/PS/P.SCAN/MP3 button (4) is pressed, the channel searches for each user preset station from SR1 to SR2 to SR3.

When an available channel is detected, the station will be held at that preset number and play for 5 seconds. After that, it will mute and search for another available station

STORING PRESET STATIONS ..........................….....(8)

The preset buttons (8) can be used to store 6 stations for convenient access to your favorite stations.

•Programming stations ..... 1. Select the desired station you want to store in memory.

2.Press and hold one of the preset buttons (8) for more than 2 seconds until the corresponding preset button number appears. Repeat steps 1. and 2. to program additional stations.

•Quick tuning .................... Press one of the six preset buttons (8) shortly to select a preset station directly.

2