Computer Interface Connections

Minuteman Power Management software and interface cables kits are used with these ports (software and cables are optional and available from Minuteman). Use only Minuteman or Minuteman approved interface cables with these UPS’s. Connect the interface cable to the DB-9 connector on the rear of the UPS (either RS-232 or Dry Contact). Secure the connector to the UPS via the screws on the connector housing. Connect the other end of the cable to the device that will be monitoring/controlling the UPS.

NOTE: CONNECTING TO THE DB9s ARE OPTIONAL. THE UPS WORKS PROPERLY WITH-

OUT A CONNECTION.

TELEPHONE/NETWORK SURGE PROTECTION CONNECTION (OPTIONAL)

Connect a single or multi-line telephone or a 10 Base-T network line to the protection sockets on the rear of the UPS. This connection will require another length of telephone or network cable. The cable coming from the telephone service or networked system is connected to the port marked “IN”. The port marked “OUT” is connected to the equipment to be protected.

NOTE: CONNECTING TO THIS PORT IS OPTIONAL. THE UPS WORKS PROPERLY WITH- OUT A CONNECTION.

EXTERNAL BATTERY CONNECTOR

This is only available on the MCP 2000(i) and the MCP 3000(i) UPS’s. The battery pack is available from Minuteman. Battery packs may be daisy chained to extend its runtime. The use of any other battery pack unspecified by Minuteman may damage the UPS and void the warranty.

CHARGING THE BATTERIES

The Continuous Power Series UPS’s will charge the batteries whenever the unit is con- nected to an AC source. It is recommended that the UPS batteries be charged for a minimum of 4 hours before use. The UPS may be used immediately. However, the “On battery” run time may be less than normally expected.

CONNECTING YOUR EQUIPMENT

Plug the equipment into the receptacles on the rear of the unit. Ensure that you do not exceed the maximum output rating of the UPS (refer to the back panel of the UPS or the electrical specifications in this manual).

MCP 1000, MCP 3000i, MCP 2000i, MCP 2000, MCP 3000 specifications

The Minuteman UPS product line offers a range of uninterruptible power supplies designed to protect critical equipment from power disturbances. The models MCP 1000i, MCP 2000, MCP 2000i, MCP 3000, and MCP 3000i provide reliable backup power and advanced features that ensure continuous operation for sensitive electronics used in both home and business environments.

Starting with the MCP 1000i, this model features a capacity of 1000 VA and is equipped with line-interactive technology. This ensures that it can automatically adjust to power fluctuations without switching to battery mode, which prolongs battery life. With a user-friendly LCD interface, users can easily monitor voltage levels and battery status, ensuring peace of mind in critical situations.

The MCP 2000 and MCP 2000i models increase power capacity to 2000 VA. Both variants offer similar functionalities, but the “i” version integrates an advanced LCD display for enhanced monitoring capabilities. They come equipped with multiple outlets, allowing users to connect various devices while maintaining protection against surges and outages. Both versions boast high-efficiency operation, which minimizes energy waste and reduces operating costs.

Moving to the MCP 3000 and MCP 3000i models, these UPS units are designed for larger power demands, offering 3000 VA capacity. The MCP 3000 maintains a line-interactive topology, providing continuous protection against brownouts and voltage spikes. The augmented MCP 3000i boasts an advanced LCD interface, providing real-time information and alerts, allowing users to diagnose issues quickly and effortlessly. This series is suitable for powering critical servers, networking equipment, and high-performance workstations.

Key features across all models include an energy-saving Green Mode, which maximizes efficiency by reducing energy consumption. They also incorporate Smart Battery Management, which enhances battery performance and longevity through intelligent charging and discharging cycles. Robust surge protection helps safeguard devices against transient voltage spikes.

These Minuteman UPS systems are designed with user convenience in mind, featuring hot-swappable batteries for effortless maintenance without shutting down connected devices. Overall, the MCP series provides reliable power protection, advanced technology, and user-friendly features, making them suitable solutions for both home and professional environments in need of uninterrupted power.