Turning the Unit ON/OFF

NOTE: For hardwire I/O configurations for the MCP 2000(i) and the MCP 3000(i), units are considered fixed. When connecting equipment to hardwire I/O configurations ensure use of proper size gauge wires for all connections.

CAUTION! DO NOT CONNECT A LASER PRINTER TO THE UPS UNLESS THE UPS IS RATED 2000VA OR GREATER. A LASER PRINTER DRAWS SIG- NIFICANTLY MORE POWER WHEN PRINTING THAN AT IDLE AND MAY OVER- LOAD THE UPS.

Press and release the ON/OFF switch to turn the unit on and supply power to the load. All LED’s will remain lit for approximately 2-3 seconds. The Bypass LED will remain on for approximately 15 seconds. The UPS will then switch from the Bypass LED to the On-line LED indicating AC line is normal and UPS is capable of protecting connected equipment. Press and release the switch again to turn the UPS off. The UPS will continue to charge the batteries whenever the unit is connected to an outlet source and AC power is present.

ALARMS

ON BATTERY

When the UPS is operating on battery, the “ON BATTERY” LED will light continuously and the audible alarm will sound every 30 seconds. The alarm will stop once the UPS returns to on-line operation or the UPS shuts down.

UPS FAULT

When the UPS detects a hardware fault, the “FAULT” LED will illuminate and the UPS will emit a constant tone. The fault condition can be re-set by turning the UPS off and then on.

OVERLOAD

When the amount of load attached to the UPS exceeds its power rating, the “OVERLOAD” LED will illuminate and the UPS will emit a continuous, steady tone. This alarm will remain on until the excess load is removed or the UPS’s self protection circuit shuts the UPS down.

OVERVOLTAGE

When the input utility voltage exceeds the rated input voltage of the UPS, the “BYPASS” LED will remain lit while the On-Line LED blinks simultaneously with the sound of the alarm. The UPS will transfer to battery mode and supply the loads through the battery.

LOW BATTERY WARNING

The UPS will emit a tone every 5 seconds when the battery reserve runs low. It continues to emit the tone until AC returns or the UPS shuts down from battery exhaustion.

MCP 1000, MCP 3000i, MCP 2000i, MCP 2000, MCP 3000 specifications

The Minuteman UPS product line offers a range of uninterruptible power supplies designed to protect critical equipment from power disturbances. The models MCP 1000i, MCP 2000, MCP 2000i, MCP 3000, and MCP 3000i provide reliable backup power and advanced features that ensure continuous operation for sensitive electronics used in both home and business environments.

Starting with the MCP 1000i, this model features a capacity of 1000 VA and is equipped with line-interactive technology. This ensures that it can automatically adjust to power fluctuations without switching to battery mode, which prolongs battery life. With a user-friendly LCD interface, users can easily monitor voltage levels and battery status, ensuring peace of mind in critical situations.

The MCP 2000 and MCP 2000i models increase power capacity to 2000 VA. Both variants offer similar functionalities, but the “i” version integrates an advanced LCD display for enhanced monitoring capabilities. They come equipped with multiple outlets, allowing users to connect various devices while maintaining protection against surges and outages. Both versions boast high-efficiency operation, which minimizes energy waste and reduces operating costs.

Moving to the MCP 3000 and MCP 3000i models, these UPS units are designed for larger power demands, offering 3000 VA capacity. The MCP 3000 maintains a line-interactive topology, providing continuous protection against brownouts and voltage spikes. The augmented MCP 3000i boasts an advanced LCD interface, providing real-time information and alerts, allowing users to diagnose issues quickly and effortlessly. This series is suitable for powering critical servers, networking equipment, and high-performance workstations.

Key features across all models include an energy-saving Green Mode, which maximizes efficiency by reducing energy consumption. They also incorporate Smart Battery Management, which enhances battery performance and longevity through intelligent charging and discharging cycles. Robust surge protection helps safeguard devices against transient voltage spikes.

These Minuteman UPS systems are designed with user convenience in mind, featuring hot-swappable batteries for effortless maintenance without shutting down connected devices. Overall, the MCP series provides reliable power protection, advanced technology, and user-friendly features, making them suitable solutions for both home and professional environments in need of uninterrupted power.