Minuteman UPS MCP 3000i, MCP 2000i, MCP 1000i user manual Communication Interface, Hardware

Page 15

COMMUNICATION INTERFACE

(1) RS232

 

 

 

 

 

NC-----------------

1

NC-----------------

6

 

TXD---------------

2

NC-----------------

7

 

RXD---------------

3

NC-----------------

8

 

NC-----------------

4

NC-----------------

9

 

Signal Ground---

5

 

 

Pin2:

UPS transmits serial data to computer.

 

Pin3:

UPS receives serial data from computer.

 

Pin5:

Signal ground.

 

 

 

The RS232 communication port provides the following features:

¨Monitoring charger status

¨Monitoring battery status and condition

¨Monitoring inverter status

¨Monitoring UPS status

¨Monitoring the utility status

¨Remote control shutdown of UPS

All information is provided in ASCII format.

HARDWARE:

BAUD RATE ————————— 2400 BPS DATA LENGTH ———————— 8 bits STOP BIT ——————————-1 bit PARITY ———————————-NONE

CABLING:

COMPUTER

RX (Pin2)

TX (Pin3)

GND (Pin5)

(1) DRY CONTACT

¬

®

®

UPS

TX (Pin2)

RX (Pin3)

GND (Pin5)

NC-----------------

1

Low Battery--------

6

NC-----------------

2

NC-----------------

7

Shut Down-------

3

NC-----------------

8

AC Fail------------

4

NC-----------------

9

Signal Ground---

5

 

 

Pin4: Output signal transfers from HIGH to LOW during utility failures. The pin is normally HIGH.

Pin6: Output signal transfers from HIGH to LOW upon battery low. The pin is normally HIGH.

Pin9: The UPS will shut down when HIGH remains constant for at least 3.8 seconds.

Pin5: Signal ground.

13

Image 15
Contents MCP Series Page MCP Series User’s Manual Explanation of Symbols Important Safety Instructions Please Save the Packing Materials Receiving InspectionPara Systems Life Support Policy Power Switch LED IndicatorsFront Panel Rear Panel MCP 1000i Rear Panel MCP 2000 Rear Panel MCP 2000i Rear Panel MCP 3000 Rear Panel Installation Placement OUT a Connection Computer Interface ConnectionsTurning the Unit ON/OFF Hardware Communication InterfaceSymtom Possible Cause What To Do Troubleshooting ChartReplacing the Batteries UPS Battery pack connectionIf the UPS Requires Service MCP Acceptable Input Voltage Except AS Provided HEREIN, Para Systems Makes no Warranties Limited Product WarrantyPage Page 34000130 REV

MCP 1000, MCP 3000i, MCP 2000i, MCP 2000, MCP 3000 specifications

The Minuteman UPS product line offers a range of uninterruptible power supplies designed to protect critical equipment from power disturbances. The models MCP 1000i, MCP 2000, MCP 2000i, MCP 3000, and MCP 3000i provide reliable backup power and advanced features that ensure continuous operation for sensitive electronics used in both home and business environments.

Starting with the MCP 1000i, this model features a capacity of 1000 VA and is equipped with line-interactive technology. This ensures that it can automatically adjust to power fluctuations without switching to battery mode, which prolongs battery life. With a user-friendly LCD interface, users can easily monitor voltage levels and battery status, ensuring peace of mind in critical situations.

The MCP 2000 and MCP 2000i models increase power capacity to 2000 VA. Both variants offer similar functionalities, but the ā€œiā€ version integrates an advanced LCD display for enhanced monitoring capabilities. They come equipped with multiple outlets, allowing users to connect various devices while maintaining protection against surges and outages. Both versions boast high-efficiency operation, which minimizes energy waste and reduces operating costs.

Moving to the MCP 3000 and MCP 3000i models, these UPS units are designed for larger power demands, offering 3000 VA capacity. The MCP 3000 maintains a line-interactive topology, providing continuous protection against brownouts and voltage spikes. The augmented MCP 3000i boasts an advanced LCD interface, providing real-time information and alerts, allowing users to diagnose issues quickly and effortlessly. This series is suitable for powering critical servers, networking equipment, and high-performance workstations.

Key features across all models include an energy-saving Green Mode, which maximizes efficiency by reducing energy consumption. They also incorporate Smart Battery Management, which enhances battery performance and longevity through intelligent charging and discharging cycles. Robust surge protection helps safeguard devices against transient voltage spikes.

These Minuteman UPS systems are designed with user convenience in mind, featuring hot-swappable batteries for effortless maintenance without shutting down connected devices. Overall, the MCP series provides reliable power protection, advanced technology, and user-friendly features, making them suitable solutions for both home and professional environments in need of uninterrupted power.