Minuteman UPS Endeavor user manual If the UPS Requires Service

Page 21

English

IF THE UPS REQUIRES SERVICE

1.Use the TROUBLESHOOTING section to eliminate obvious causes.

2.Verify there are no circuit breakers tripped. A tripped circuit breaker is the most common problem.

3.Call your dealer for assistance. If you cannot reach your dealer, or if they cannot resolve the problem call or fax MINUTEMAN Technical Support at the following numbers; Voice phone (972) 446-7363, FAX line (972) 446-9011 or visit our Web site at www.minutemanups.com the "Discussion Board". Please have the following information available BEFORE calling the Technical Sup- port Department.

A.Your name and address.

B.Where and when the unit was purchased.

C.All of the model information about your Battery Pack and UPS.

D.Any information on the failure, including LEDs that may be illuminated.

E.A description of the protected equipment, including model numbers if possible.

F.A technician will ask you for the above information and, if possible, help solve your problem over the phone. In the event that the unit requires fact- ory service, the technician will issue you a Return Material Authorization Number (RMA #).

G.If the Battery Pack is under warranty, the repairs will be done at no charge. If not, there will be a charge for repair.

4.Pack the Battery Pack in its original packaging. If the original packaging is no longer available, ask the Technical Support Technician about obtaining a new set. It is important to pack the Battery Pack properly in order to avoid damage in transit. Never use Styrofoam beads for a packing material.

A.Include a letter with your name, address, day time phone number, RMA number, a copy of your original sales receipt, and a brief description of the problem.

5.Mark the RMA # on the outside of all packages. The factory cannot accept any package without the RMA # marked on the outside.

6.Return the Battery Pack by insured, prepaid carrier to:

Para Systems Inc.

MINUTEMAN UPS

1455 LeMay Drive

Carrollton, TX 75007

ATTN: RMA # _______

20

Image 21
Contents Endeavor Series Battery Packs English Important Safety Instructions English EDBP24XL EDBP48XL EDBP72XL UPS Please Save the Packing Materials Receiving InspectionRear Panel Indicator PanelInstallation Installation PlacementRackmount Configuration Wallmount Configuration Tower ConfigurationWallmount Configuration Qualified Service Personnel only Connecting the Battery PackConnecting the Battery Pack to AN AC Source Charging the BatteryDaisy Chaining English Dipswitch Settings Turning the Battery Pack ON/OFFIndicators System OverviewInto the AC wall outlet Formed by Qualified Service Personnel only Replacing the BatteryBattery Replacement Procedure English English If the UPS Requires Service System Specifications English Limited Product Warranty English