Ovation Software Ovation user manual Installation, Insert the SIM card

Page 10

Installation

Encryption is disabled by default on your Ovation and should be set up as the final step in your installation. See page 37 for stepo

ensure the highest level of protection, you should complete your initial setup using a LAN connection.

Step 1: Insert the SIM card

You must insert the SIM card before you can access the Internet. Please insert the SIM before you connect the power adapter. Take care not to touch or damage the contact points on the SIM card. Use the notch in the tray as a guide to properly insert the SIM card.

Important: If you need to remove or replace your SIM card, make sure you are disconnected from the Internet and that the power adapter is unplugged.

•Push the eject button using a pointed object, such as a pen or pencil, and then remove the SIM tray from the card slot.

•Align the orientation notch on the SIM card with

the orientation notch on the tray.

•Insert the SIM card into the tray.

•Reinsert the SIM tray into the card slot.

9

Image 10

Contents LAN Contents Advanced Network Settings Wireless Security SettingsTroubleshooting Glossary Specifications Instant protection Simple setupWelcome Additional securityLCD display UmtsSide panel SIM card slotWall mounting Safety guidelines Page Installation Insert the SIM cardConnect the power Connect your computer Choose Startol Panel and then select Network ConnectionsLAN connection Connect to the Internet Select the Connections tab and click SettingsPop Installation Installation Page Internet Settings Opening the ToolsChanging your PIN code Current PIN Code boxClick System Settings then Umts Conn Disconnect automaticallyReconnect automatically Monitor usage Click Disconnect on the Connection Manager window Disconnect from the InternetPress the Umts on/off button on the side of your Ovation Adjust the time Click Advanced Settings, then Date & TimePage Click Configuration then PIN Code & Password Administration SettingsChange your password Confirm New Password boxesBack up your settings Click Configuration then Backup & RestoreRestore your settings Upgrade the Ovation firmware Clear your browser cache. See page 52 for instructions Page Restore Factory Default Settings Page Send messages Read messagesSetup options Delete messagesDetermine the exposure Wireless Security SettingsReview the basics Network Address TranslationWired Equivalent Protection WEP Protect your dataReconnecting your computer Click System Settings then Wlan AP SecuritySelect WEP as Encryption WiFi Protected Access WPA What are the drawbacks?Select WPA Enter your passphrase in the PSK fieldClick System Settings then Rename your networkRestrict access Check Enable ACLHide your network Uncheck Broadcast SsidWhat happens in case of a Denial of Service attack? Control the trafficBlock content Click Advanced Settings then Logs Monitor activityPage Select Enable DMZ, using Advanced Network SettingsHow do I set up a DMZ server? DMZ serverWlan Mode Reboot Page Is JavaScript enabled for your browser? TroubleshootingWhy doesn’t the Connection Manager window appear? Click Extended Select Enable JavaScript for NavigatorClick Empty Cache Is your Wid installed properly?Did you clear the browser cache? Choose Startol PanelHow can I tell if I am connected? How do I rePage 802.11g Glossary802.11b FirmwareMAC address IP addressPassphrase Network adapterGlossary PortPage Specifications Wlan