Ovation Software Ovation user manual Connect the power

Page 11

Installation

Step 2: Connect the power

Only use the power adapter you received with your Ovation. Using a different power adapter could cause damage. After you connect the power, a startup process begins. This process takes about 60 to 90 seconds. Please wait until you see the message “Enter PIN Code” on the LCD before proceeding to Step 3.

If you see the message “SIM Failure” or “Insert SIM” on the LCD, then the SIM card is defective, was inserted incorrectly, or was not inserted at all. Unplug the power adapter and check the SIM card.

•Plug the power adapter into your Ovation.

•Plug the power adapter into an outlet.

10

Image 11

Contents LAN Contents Troubleshooting Glossary Specifications Wireless Security SettingsAdvanced Network Settings Additional security Simple setupWelcome Instant protectionUmts LCD displaySIM card slot Side panelWall mounting Safety guidelines Page Insert the SIM card InstallationConnect the power Choose Startol Panel and then select Network Connections Connect your computerLAN connection Pop Select the Connections tab and click SettingsConnect to the Internet Installation Installation Page Opening the Tools Internet SettingsCurrent PIN Code box Changing your PIN codeDisconnect automatically Click System Settings then Umts ConnReconnect automatically Monitor usage Press the Umts on/off button on the side of your Ovation Disconnect from the InternetClick Disconnect on the Connection Manager window Click Advanced Settings, then Date & Time Adjust the timePage Confirm New Password boxes Administration SettingsChange your password Click Configuration then PIN Code & PasswordClick Configuration then Backup & Restore Back up your settingsRestore your settings Upgrade the Ovation firmware Clear your browser cache. See page 52 for instructions Page Restore Factory Default Settings Page Read messages Send messagesDelete messages Setup optionsNetwork Address Translation Wireless Security SettingsReview the basics Determine the exposureProtect your data Wired Equivalent Protection WEPSelect WEP as Encryption Click System Settings then Wlan AP SecurityReconnecting your computer What are the drawbacks? WiFi Protected Access WPAEnter your passphrase in the PSK field Select WPARename your network Click System Settings thenCheck Enable ACL Restrict accessUncheck Broadcast Ssid Hide your networkControl the traffic What happens in case of a Denial of Service attack?Block content Monitor activity Click Advanced Settings then LogsPage DMZ server Advanced Network SettingsHow do I set up a DMZ server? Select Enable DMZ, usingWlan Mode Reboot Page Click Extended Select Enable JavaScript for Navigator TroubleshootingWhy doesn’t the Connection Manager window appear? Is JavaScript enabled for your browser?Choose Startol Panel Is your Wid installed properly?Did you clear the browser cache? Click Empty CacheHow do I re How can I tell if I am connected?Page Firmware Glossary802.11b 802.11gNetwork adapter IP addressPassphrase MAC addressPort GlossaryPage Wlan Specifications