Pentair BL-C111A Installing the system for the first time, Click the Configure ScreenLogic button

Page 7

5

Step 2: Updating or installing ScreenLogic Connect software on your PC

ScreenLogic Connect is the program that will allow you to configure and operate your IntelliTouch pool/spa control system.

1.Connect the Video & Lighting protocol adapter to port 1, 2, 3, or 4 on your wireless router.

2.Run setup.exe on the installation CD.

3.Follow the prompts to update or install ScreenLogic Connect.

Installing the system for the first time

Have the camera(s) cable(s) ready to connect to the ScreenLogic Video & Lighting Protocol adapter during the program installation setup. Each camera must be setup one at a time.

To setup the ScreenLogic Video & Lighting Protocol adapter for the first time:

1.Click the ScreenLogic Connect icon on your desktop. The screen shown below will be displayed.

Note: The default IP address for the Video & Lighting Protocol adapter is 192.168.2.3. If necessary, you can view and configure the Video & Lighting Protocol Adapter IP settings by clicking the “Configure IP Info” button.

2.Click the Configure ScreenLogic button.

ScreenLogic system password

ScreenLogic Video &

Lighting Protocol

Adapter IP address

ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide

Image 7
Contents Page ScreenLogic Video & Lighting Protocol Adapter kit contents Contents COM ScreenLogic VideoScreenLogic Video & Lighting Protocol Adapter Name Do not configure this adapterClick on the Pentair Brick 192.168.2.280 and click Start Installing the ScreenLogic Video & Lighting protocol adapterClick the Configure ScreenLogic button Installing the system for the first timeConfiguring the Video Cameras for the First Time Page Start ScreenLogic button Using the Video Camera Interface Configure ScreenLogic button Installing Lights for the first timeClick the Configure Lighting button to configure the lights Page Page Using the Light Interface 520936 Rev a