6
3.The software will configure the smaller ScreenLogic Protocol Adapter for use with the Video & Lighting Protocol Adapter. A “System Configuration Complete” message box will be displayed. Click OK to continue with the installation. Please be patient while the Video & Lighting Protocol adapter synchronizes the settings from the IntelliTouch system for the first time. This can take anywhere from 3 to 15 minutes depending upon the complexity of your IntelliTouch system.
Note: When synchronizing is complete, the current system information is displayed in the dialog box (see dialog on right).
Configuring the Video Camera(s) for the First Time
To configure the video camera(s) for the first time:
1.Connect the RJ45 camera cable to the ScreenLogic Wireless Router port 1, 2, 3, or 4 and plug in the camera. See page 2 for connection diagram. Please allow the video camera 45 seconds to power up before proceeding.
2.Click the Configure Video button to configure the camera.
3.Click the Add New Camera button.
4.Click the OK button on the message dialog box. Ensure that the camera was plugged in within the last 20 minutes.
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide