11
5.Click the Add New button.
6.Press the light switch five (5) times in the ON position. The green LED on the light switch will start blinking rapidly which indicates that the light is ready to be configured. See page 2 for connection diagram.
7.Click the OK button on the message dialog box.
8.Rename the light in the “Name” box. Use a name that describes where the light is located. Click the OK button. The light setup procedure will take about one minute for each light fixture.
9.To setup additional lights, click the Add New button and repeat steps 6 - 9.
ScreenLogic Video & Lighting Protocol Adapter User’s and Installation Guide