INSTALLING UPS BATTERY
UPS Battery
Removed
Battery
Cover
Place the optional UPS battery in the battery compartment in the way as indicated in the picture. Screw on the battery cover and join the battery cable into the cable routing operation. Please enable UPS function in software setting before use.
ROUTING THE CABLES
Place all the cables required for connections to the TP6000 series except those for special application purposes into the cable passage. Inset one end of the cable passage cover under the battery cover and screw on the two screws. Be sure not to damage any of the cables during this operation.
Now, turn the adjustable paddle assembly back to normal orientation and arrange all cables to come out of the area for mounting main unit from the bottom edge for ease of later operation.
TP6000 USER’S MANUAL 4 - 3