Using the Touch POS

APPLICATION ENVIRONMENT

It is very important that you check the following operational guidelines:

Ventilation

This terminal must NOT be operated in an environment with restricted ventilation. The installation should be such that there is at least 25mm air clearance around any top or side ventilation holes. The installation must also be such that there is a free flow of air around the unit at ALL times.

Operating Environment

The equipment must not be operated or stored in extremes of both temperature and humidity/moisture.

(Operating range 5°C to 35°C and up to 80% humidity – non condensing)

Power Supply

The operating voltage range of the power adaptor should cover the local power supply for proper operation. The power cable, the power outlet and any power fusing arrangements must conform to local safety regulations.

I/O Ports Utilization

The TP6000 series, designed to accommodate today’s and tomorrow’s technology, has an adequate yet not vast number of I/O ports as limited by spacial conditions. Therefore, selection on the peripheral device type and the port utilized now requires some special attention. Here are some recommendations on the device application:

Serial customer display – use USB to RS232 adapter to connect to USB port or directly connect to COM1 port

MODEM – use USB modem

MSR – this option is internally connected to KB wedge.

TP6000 USER’S MANUAL 5 - 1