POSIFLEX Business Machines TP-6000 SERIES Display Resolution, Touch Panel, Touch Terminal Manager

Page 30

DISPLAY RESOLUTION

For best viewing result please set your display resolution of TP6012 at 800 x 600 with true color in the operation system. For TP6015, please set the display resolution at 1024 x 768 with high color.

TOUCH PANEL

The touch panel in TP6000 series, either PS2 interfaced or RS232 interfaced, when its driver is properly installed, works exactly like a standard mouse. However, if the system is running under safe mode due to a previous improper shutdown or any reason else, most drivers are disabled in this mode and the point touched may be off calibrated from the mouse pointer shown. It is recommended to apply a standard PS2 mouse or keyboard for data input in this mode.

All the below mentioned mouse emulation functions can be manipulated through relevant software. The system can give a beep when the touch panel is touched and can respond as if the left button of a PS2 mouse is clicked at the point touched. If the point touched is dragged across the screen surface, it can respond as if the mouse is dragged across with left key pressed. If the point is touched, released and touched within a short time interval, it can work just like double-clicking the mouse. For the standard PS2 interfaced touch panel controller, touching the screen for a while followed by a slight move of the touch without leaving the screen surface can result as a click on the right button of the mouse at that point. For the RS232 interfaced touch panel controller, touching any point on the screen surface after touching the right- click sticky button results as a click on the right button of the mouse at that point. However, the right button function is not applicable under WIN NT environment.

TOUCH TERMINAL MANAGER

The touch panel control parameters are already well calibrated in the factory before delivery. In principal the touch panel requires no further touch up once properly set. However, a program named “Posiflex Touch Terminal Manager” is installed in the preloaded Windows system for the user to maneuver versatile features of the touch terminal with PS2 interfaced touch panel controller. This program can

TP6000 USER’S MANUAL 5 - 6

Image 30
Contents TP-6000 Series Some Important Notes Table of Contents Power ON/OFF USER’S Manual Product ConfigurationBrief Introduction OverviewStandard Features Optional Items TP6000 USER’S Manual 1 System BOX Contents Optional Devices Parts Identification Front ViewSide Views Right Side ViewLeft Side View Rear View Rear View of Main UnitAdjustable Paddle Assembly Bottom of Paddle AssemblyConnectors PS/2 KB TP6000 USER’S Manual 3 Installation Guides Separating Main UnitPreparing Paddle Assembly Installing UPS Battery Routing the CablesPreparing the Main Unit Joining Main Unit and PaddleOpening Cable Cover Connecting Cables Installing Cash DrawersLocation for Installation Wall MountingPage Using the Touch POS Application EnvironmentExternal Monitor Serial Port COM1Serial Port COM2 Power ON/OFF LED IndicatorHardware Switch Preset Power On ControlSoftware Support Magnetic Stripe Reader Cash DrawersDisplay Resolution Touch PanelTouch Terminal Manager RS232 Touch Monitor Mouse