the hole and make sure that all pegs are inside the holes. Then slide the main unit down to move the pegs into the lower slot part of the holes till it clicks. Note that all the cables come out of the paddle from the lower edge and won’t get trapped by this mounting operation. If later on you want to remove the main unit from the paddle, you’ll have to press down the lock/release button on back of the paddle at the time lifting the main unit.
OPENING CABLE COVER
Insert the tip of the latchkey into a latch hole on one side near bottom of the main unit. Turn this key counterclockwise to the end. Do the same on the opposite side. Be sure to take the key out of the hole.
Turn Counterclockwise
Then Take Out The
Latchkey
Then push the lock/release lever on the base backward to adjust the paddle to the most horizontal position for ease of operation. Open the cable cover by pulling at
the removal hollow.
Pull The Removal Hollow Toward The User
TP6000 USER’S MANUAL 4 - 5