Pots and Power, Circuit Description | Oakley OMS-820, MOTM-820

automatically. Removing the gate has no effect on the output. This is 'one shot' mode. However, the output may be forced to decay prematurely by pressing the RESET push button, or by use of the RESET input. A positive signal of above 3V or so will activate reset.

Switch to AR and Resetable mode. The MOTM output will rise until +7V is reached whereby it will stay there indefinitely, or until the RESET button or RESET input is activated.

Remember that all rise and fall times are controlled by the pots on the MOTM-820 and OMS-820. And can be varied from less than 1mS to well over two minutes.

Four LEDs are included on the front panel. Two of these indicate the status of the gate and reset inputs. Another will show the EG's status, this will light when the MOTM’s output is rising or stationary. A fourth LED, a bicolour type, will give visual indication of the final output signal.

The OMS-820's two pots together with the MOTM's own pots, control the rise and fall time. This will enable you to set a time of say, 1 sec with the OMS-820's pots and then introduce a modulation signal at the MOTM’s CV inputs. The depth of which is controlled by the MOTM's pots.

The OMS-820 and the MOTM-820 are connected together by one 4 way 0.1" connector. It can be simply removed if the modules need to come apart at anytime. The wires from the connectors are simply soldered to special key locations on the MOTM-820. No component changes are required to the MOTM-820 at all. Inserting a jack plug into the IN socket of the MOTM will override any control signal sent by the OMS-820. The MOTM-820 will then behave as a conventional VC Lag module.

Of Pots and Power

There are just two main control pots on the PCB. If you use the specified pots and brackets, the PCB can be held firmly to the panel without any additional mounting procedures. The pot spacing is on a 1.625” grid and is the same as the vertical spacing on the MOTM modular synthesiser. The PCB has four mounting holes, one in each corner should you require additional support which you probably won’t.

The design requires plus and minus 15V supplies. These should be adequately regulated. The current consumption is about 20mA, although this varies slightly as the OUT LED turns on and off. Power is routed onto the PCB by a four way 0.156” Molex type connector. Provision is made for the two ground system as used on all Oakley modular projects, and is compatible with the MOTM systems. See later for details.

Circuit Description

Let us first refresh ourselves with the operation of the MOTM-820. Basically it is a capacitor that can discharged and charged at a controlled rate. The level to which the capacitor charges to, or discharges to, is determined by the input voltage applied to the MOTM-820. The

MOTM-820, OMS-820 specifications

The Oakley OMS-820 and MOTM-820 stand out as exemplary models in Oakley's extensive range of performance eyewear, designed for both sports enthusiasts and everyday users. These models capture the essence of Oakley's commitment to innovation, superior optical technology, and stylish design.

One of the main features of the OMS-820 is its advanced lens technology. Utilizing Oakley’s High Definition Optics (HDO), the lenses provide exceptional clarity and optical fidelity. This technology minimizes distortion, ensuring that users have an unobstructed view, whether they are on the golf course, cycling, or participating in other outdoor activities. The lenses also come with Oakley's PRIZM technology, which enhances color contrast and visibility in various environments, allowing users to detect changes in terrain or obstacles more readily.

The MOTM-820, on the other hand, emphasizes adaptability and comfort. It features a lightweight frame crafted from Oakley’s proprietary O Matter material, which provides flexibility and resilience. This ergonomic design conforms to the shape of the wearer's face, ensuring a secure yet comfortable fit during extended use. The adjustable nose pads and temples further enhance comfort, making it ideal for an active lifestyle.

Both models incorporate Oakley’s innovative lens treatment technology, which includes anti-fog and anti-scratch advancements. This ensures that the eyewear remains clear in challenging conditions, whether users are facing misty weather or rugged terrains. Additionally, the UV protection offered by these lenses shields wearers from harmful rays, a critical feature for outdoor activities.

A striking characteristic of the Oakley OMS-820 and MOTM-820 is their customizable aesthetics. Available in a myriad of colors and styles, users can express their individuality while enjoying high-performance eyewear. This attention to style combined with functionality makes these models popular choices among both athletes and casual wearers alike.

In summary, the Oakley OMS-820 and MOTM-820 are distinguished models that integrate cutting-edge technology with comfort and style. Whether for competitive sports or daily wear, these eyewear options exemplify Oakley’s commitment to enhancing visual performance and user satisfaction.